Watch Video:

Amada/Marvel PA13MPC - Scissor Style Saw NEW HORIZONTAL BAND SAWS

Price on Request

Make:: Amada/Marvel

Model:: PA13MPC - Scissor Style Saw

Year:: NEW

Ref #:: 161189

Or call us for a quote at (973) 497-7500 or send us an email at boringmills@machineryvalues.com

NEW AMADA/MARVEL 
HORIZONTAL SCISSOR STYLE SAW
MODEL: PA13MPC

 
  HEAVY-DUTY 
HIGH SPEED 
HYDRAULIC 
5 H.P. 
1-1/4" BLADE 
PROGRAMMABLE CONTROL 

 
 
SPECIFICATIONS & FEATURES:
CUTTING CAPACITY	
ROUND (DIAMETER) .............. 13″ (330 MM)
RECTANGLE (W X H) ............. 14.2″ X 13″ (330 X 360 MM)
WORK LOAD CAPACITY ............ 6,250 LBS (2,840 KG)
SAW BLADE	
BLADE SIZE (L X T X W) ........ 13’6″ X 0.42″ X 1-1/4″ (4115 X 1.1 X 34 MM)
BLADE SPEED ................... 79-456 FT/MIN BY INVERTER (24-139 M/MIN BY INVERTER)
BLADE TENSION ................. HYDRAULICALLY CONTROLLED
TOP LIMIT SETTING	: AUTOMATIC SETTING WITH QUICK APPROACH FEELER
CUTTING CONTROL : HYDRAULIC PRESSURE & FLOW CONTROL VALVE
VISE TYPE ..................... FRONT SPLIT VISE AND REAR VISE
CONTROL ....................... HYDRAULIC FULL-STROKE CYLINDER
MOTORS	
SAW BLADE ..................... 5 HP (3.7 KW)
HYDRAULIC PUMP ................ 2.0 HP (1.5 KW)
COOLANT SYSTEM ................ 1/4 HP (0.12 KW)
POWER REQUIREMENT	
POWER SUPPLY VOLTAGE .......... AC230V±10%, 3  PH, 60 HZ
REQUIRED AT FACTORY VOLTAGE SETTING
CUTTING FLUID TANK CAPACITY ... 21 GAL 
HYDRAULIC TANK CAPACITY ....... 17 GAL
PRESSURE SETTING .............. 569 PSI (4.0 MPA (40 KGF/CM2)
CHIP DISPOSAL ................. CHIP CONVEYOR
INDEX MECHANISM	............. SHUTTLE VISE
MACHINE DIMENSIONS (W X L X H)	
HEAD UP POSITION .............. 100" 85.0″ X 80.0″
HEAD DOWN POSITION ............ 100" X 85.0″ X 53.0″	
TABLE HEIGHT .................. 28.5″
MACHINE WEIGHT ................ 4,200 LBS
 
BLADE TENSION: 
HYDRAULICALLY CONTROLLED TENSION (30,000 PSI) PROVIDES CONSISTENT SQUARE CUTTING ACCURACY. THE MOTION DETECTOR WILL SHUT THE MACHINE OFF SHOULD THE BLADE BREAK OR STALL. 
SPEED RANGE:
70 – 330 FEET PER MINUTE (21 – 101 METERS PER MINUTE) INFINITELY VARIABLE THROUGH A FREQUENCY INVERTER DRIVE AND HEAVY-DUTY WORM GEAR TRANSMISSION. THE BROAD SPEED RANGE ALLOWS FOR OPTIMUM CUTTING OF A LARGE SPECTRUM OF MATERIALS. A READ OUT AT THE OPERATOR’S TOUCH SCREEN ASSURES ACCURATE SPEED SETTING. 
HYDRAULIC DOWN FEED:
FEED RATE AND DOWN PRESSURE CAN BE CONTROLLED INDEPENDENTLY FOR FAST, ACCURATE CUTTING. SETUP IS MADE EASY THROUGH THE COLOR-CODED DIAL ALLOWING THE OPERATOR TO SELECT THE OPTIMUM SETTING FOR THE TYPE OF MATERIAL BEING CUT. BOTH SETTINGS ARE MADE AT THE OPERATOR’S STATION.
HYDRAULIC SHUTTLE FEED:
LENGTH SETTINGS OF 0 - 20" ARE ACCOMPLISHED WITH SIMPLE PROGRAMMING AT THE OPERATOR'S TOUCH SCREEN. THE SHUTTLE COMES TO POSITIVE STOPS AT BOTH ENDS OF THE INDEX, ASSURING CUTOFF LENGTH ACCURACY, REDUCING MATERIAL LOSS. REPEATABILITY IS ± .005 PER INDEX. 
MOTORS:
BLADE DRIVE: 5 H.P. (3.75 KW) INVERTER DRIVE. 
HYDRAULIC PUMP MOTOR: 1 H.P. (.75 KW). 
COOLANT PUMP MOTOR: .125 H.P. (0.09 KW). 
ALL MOTORS ARE 230-VOLT, 3 PH. 60 HZ. 
OPERATOR'S CONTROL PANEL:
CONVENIENTLY MOUNTED ON THE LEFT-HAND SIDE OF THE MACHINE AND OFFERS FULL CONTROL OF ALL MACHINE FUNCTIONS SUCH AS; VISES, BLADE SPEED, SAW FRAME, BUNDLE CLAMPING, PARTS COUNTER, SHUTTLE ADVANCE & RETRACT, COOLANT AND WORK LIGHT. (A STANDALONE OPERATOR’S CONTROL CONSOLE IS AVAILABLE AS AN OPTION). 
MPC PROGRAMMABLE CONTROL:
CONVENIENTLY LOCATED ON THE OPERATOR’S CONTROL PANEL, THIS TOUCH SCREEN CONTROL ALLOWS THE OPERATOR TO PROGRAM AND STORE UP TO 100 JOBS. INPUTS INCLUDE PART LENGTH FROM 0 TO 999” (25.4 M) (IN INCHES UP TO 3 DECIMAL PLACES) AND NUMBER OF PIECES TO BE CUT. THE AUTOMATIC PIECE COUNTER STOPS EACH JOB WHEN THE PRE-SET NUMBER OF CUTS HAS BEEN MADE. THE CONTROL PROVIDES THE OPTION OF RUNNING UP TO 20 PARTS IN ONE JOB CONSECUTIVELY. 
OUT-OF-STOCK SWITCH:
THE MACHINE WILL SHUT OFF AUTOMATICALLY WHEN MATERIAL IS NO LONGER PRESENT IN THE REAR VISE JAWS, ALLOWING FOR TRULY AUTOMATIC OPERATION. 
BLADE GUIDES:
THE COMBINATION ROLLER BEARING, AND CARBIDE BLADE GUIDES REDUCE HEAT AND BLADE STRESS PROVIDING LONGER BLADE LIFE AND ACCURACIES OF +/- .002 PER INCH (.051MM) OF CUT MATERIAL. 
FAST APPROACH:
WORK HEIGHT IS AUTOMATICALLY SET ALLOWING THE HEAD TO RISE JUST ENOUGH TO CLEAR THE WORK PIECE, REDUCING CYCLE TIME AND ALLOWING FOR FASTER CUTTING PERFORMANCE. 
AUTOMATIC CHIP REMOVAL
THE CHIP AUGER ROTATING IN THE COOLANT RETURN REMOVES CHIPS QUICKLY AND EFFICIENTLY, FREEING THE OPERATOR TO PERFORM MORE PRODUCTIVE OPERATIONS. COOLANT IS ALLOWED TO DRAIN BACK TO THE TANK BEFORE THE CHIPS ARE REMOVED FROM THE MACHINE. 
CHIP BRUSH
POWERED FROM THE MAIN DRIVE SHAFT OF THE SAW, THE BRUSH CHANGES SPEED ALONG WITH THE BLADE TO ASSURE THAT CHIPS ARE BEING REMOVED FROM EACH GULLET OF THE BLADE, IMPROVING CUTTING PERFORMANCE AND BLADE LIFE. 
FULL STROKING HYDRAULIC VISE JAWS:
FRONT JAWS ARE SPLIT TO REDUCE THE REMNANT TO AS LITTLE AS 3.375” (86 MM). THE SPLIT VISE JAWS ALSO HELP TO REDUCE BURRS LEFT ON THE MATERIAL AND ARE IDEAL FOR BUNDLE CUTTING. HOLDING THE WORK PIECE ON BOTH SIDES OF THE BLADE REDUCES BLADE VIBRATION, PROVIDING MORE ACCURATE CUTS AND LONGER BLADE LIFE. REAR VISE: THE REAR VISE JAW FLOATS HYDRAULICALLY TO ACCOMMODATE CROOKED STOCK ASSURING STRAIGHT, ACCURATE CUTS.
VARIABLE VISE PRESSURE:
HYDRAULIC CLAMPING PRESSURE TO THE WORK HOLDING JAWS CAN BE ADJUSTED AS REQUIRED TO HOLD SOLID OR THIN WALL MATERIAL, ALLOWING THE PIECE TO BE HELD SECURELY AND WITHOUT DISTORTION.
WORK LIGHT:
POSITIONED DIRECTLY OVER THE WORK AREA TO PROVIDE BETTER ILLUMINATION OF THE CUTTING AREA, THE WORK LIGHT CAN BE TURNED ON AND OFF INDEPENDENTLY FROM THE OPERATOR’S CONTROL PANEL. 
WEIGHT CAPACITY: 3,520 LBS. 
MACHINE WEIGHT: 4,200 LBS.
TABLE HEIGHT: 27”
VOLTAGE: 
MACHINES COMES STANDARD WITH A 230 VOLT - 3 PHASE - 60 HERTZ CONNECTION (230-3-60)
ALL OTHER VOLTAGES REQUIRE A SEPARATE TRANSFORMER NOT INCLUDED.
OPTIONS 
BLADE:
AMADA SGLB BLADE 13’ 6” LONG X 1.25" WIDE, 4/6 TOOTH PITCH. THIS IS THE STANDARD BLADE THAT IS INCLUDED WITH MACHINE PURCHASE AND YOU HAVE THE OPTION TO ORDER MORE. PURCHASE 10 OR MORE BLADES WITH YOUR INITIAL BANDSAW PURCHASE AND RECEIVE AN ADDITIONAL YEAR OF PARTS WARRANTY. PURCHASE 36 OR MORE BLADES AND RECEIVE AN ADDITIONAL YEAR OF PARTS WARRANTY AND UP TO 35% OFF PARTS DISCOUNT (SEE BLADE CLUB FLYER FOR DETAILS). 
P132/G1 HYDRAULIC HOLD DOWNS: 
THE NESTING FIXTURES FOR VERTICAL CLAMPING ARE DESIGNED FOR HIGH-PRODUCTION MULTIPLE CUTTING. VERTICALLY MOUNTED HYDRAULIC CLAMPS LOCATED ON EACH VISE JAW APPLY DOWNWARD PRESSURE TO HOLD MULTIPLE BAR WORK OR STRUCTURAL SHAPES. MINIMUM CAPACITY: 2” H X 7” W (50 MM X 178 MM). MAXIMUM CAPACITY: 6” H X 11” W (152 MM X 280 MM). 
FSCC FREE STANDING CONTROL CONSOLE: 
REPLACES STANDARD CONTROL CONSOLE MOUNTED TO MACHINE BASE WITH A FREE STANDING PEDESTAL AND 6’ (1.8 M) FLEXIBLE ELECTRICAL AND HYDRAULIC LINES (SPECIAL FACTORY ORDER & LEAD TIME ONLY) 
PA10/F055 FIRST SECTION DEAD ROLLER TABLE: 
5’ (1.5 METER) LONG. TABLE IS CONSTRUCTED FROM 4” X 5.4 LB. (102 MM X 2.4 KG) CHANNEL WITH FIVE 2.5” (63 MM) DIAMETER BALL BEARING ROLLERS ON 12” (305 MM) CENTERS. THIS IS THE FIRST TABLE REQUIRED FOR EITHER THE LOADING OR DISCHARGE SIDE OF THE MACHINE AND IS FREE STANDING. 
PA10/X055 EXTENSION ROLLER TABLE: 
5’ (1.5 METER) LONG. TABLE IS CONSTRUCTED FROM 4” X 5.4 LB. (102 MM X 2.4 KG) CHANNEL WITH FIVE 2.5” (63 MM) DIAMETER BALL BEARING ROLLERS ON 12” (305 MM) CENTERS. FOR USE AS EXTENSION TO FIRST SECTION. 
PA13/E11 COOLANT PAN: 
FITTING PA13 ROLLER CONVEYORS, THE COOLANT PAN COLLECTS AND RETURNS COOLANT BACK TO MACHINE. INCLUDED IS THE PAN, V-TROUGH, AND HANGERS 
PA13/ML2 AUTOMATIC MIST LUBE: 
DROP LUBRICATION SYSTEM. (REQUIRES COMPRESSED AIR CONNECTION) 
CL2210 UNIST COOLUBE 2210: 
UNIST COOLUBE 2210 IS THE CUTTING OIL AND LUBRICANT THAT IS SHIPPED WITHIN YOUR ML2 (MIST DROP LUBRICATION SYSTEM). IT IS FORMULATED AS A METAL CUTTING OIL AND LUBRICANT FOR METALS, WOOD, RUBBER, AND MOST PLASTICS. IT IS 100% NATURAL, NON-TOXIC, NON-STAINING, AND WILL NOT OXIDIZE (BECOME STICKY OR LEAVE A RESIDUE). COOLUBE 2210 CUTTING FLUID DOES NOT CONTAIN ANY INGREDIENTS CURRENTLY RECOGNIZED AS HAZARDOUS BY OSHA, IARC OR NIP. COOLUBE 2210 MACHINING OIL WILL NEVER CAUSE DERMATITIS AND IS FORMULATED FROM COSMETIC GRADE RAW MATERIALS, WHICH MAKES IT ENTIRELY WORKER AND ENVIRONMENTALLY SAFE. COOLUBE 2210 IS A USDA CERTIFIED BIOBASED PRODUCT. 
   
  

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.