Betenbender 12'-240 NEW PRESS BRAKES

Price on Request

Make:: Betenbender

Model:: 12'-240

Year:: NEW

Ref #:: 148739

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

NEW 240 TON X 12' BETENBENDER 
HYDRAULIC PRESS BRAKE
MODEL: 12'-240 
MADE IN THE USA
 
SPECIFICATIONS:
OVERALL WIDTH ....................... 56-1/2"
WIDTH OF BED ........................ 5-1/2"
WIDTH OF UPPER MACHINED RAM ......... 3-3/4"
OVERALL HEIGHT ...................... 111"
THROAT DEPTH ........................ 8"
OPEN HEIGHT ......................... 14"
CLOSED HEIGHT ....................... 8"
HEIGHT OF BED ....................... 37"
OVERALL LENGTH ...................... 159"
DISTANCE BETWEEN HOUSING ............ 126-1/2"
WIDTH OF UPPER RAM .................. 4"
WIDTH OF UPPER END PLATES ........... 60"
PRESS (IPM) ......................... 25"
RAPID APPROACH (IPM) ................ 50"
RETURN TO OPEN (IPM) ................ 70"
2-SPEED ELECTRIC SHIFT .............. STANDARD
HP .................................. 30
WEIGHT 33,000 LBS.(EST)
 
STANDARD FEATURES:
CLAMP TYPE BG-MANUAL ADJUSTABLE X, Y, Z - 24"
2-SPEED RAM (17T-70T MODELS)
3-SPEED RAM (95T-350T MODELS)
NEMA ELECTRICS
THREE POSITION FOOT PEDAL
DEPTH STOP WITH DIGITAL READOUT
BOTTOM TIME DELAY
HOUR METER
ALL HYDRAULIC FLUIDS INCLUDED
AMERICAN MADE MOTOR AND VALVES
DISCONNECT SWITCH
AMERICAN MADE HOSES AND FITTINGS
ALL STEEL CONSTRUCTION
HYDRAULIC PRESSURE: 2750 PSI
CYLINDERS ARE STEEL, DOUBLE ACTING PISTON TYPE WITH HARDENED,
GROUND AND CHROMED RODS
HARDENED PINS WITH SPHERICAL BEARINGS FOR ALIGNMENT
FRONT & BACK OF BED MACHINED SMOOTH FOR MOUNTING OF GAUGES
MULTI-SWITCH CONTROL PANEL (WITH EMERGENCY SWITCH, RUN-JOB, AND 
UP-DOWN BUTTONS) AND 3-POSITION FULLY GUARDED SWITCH
HAND WHEEL CONTROL TO .001 FOR DEPTH OF BEND ADJUSTMENT
RAM TILT MICROMETER
PRESSURE GAUGE
CONTROL PANEL
RAM MACHINED WITH 1/2" X 3/4" SLOT. (DIE RISER OPTIONAL)
 
OPTIONAL ACCESSORIES: 
MANUAL FRONT READING 24" BG W/ MECHANICAL READOUT
POWER FRONT READING BG W/ 5 STATION NC "GO-TO" POSITIONER ON 
PENDANT
POWER RAM ADJUST W/ 5 STATION NC "GO-TO" POSITIONER ON PENDANT
EXTRA LENGTH ON BACKGAUGE
MICROMETER PRECISION GAUGE UNIT
CNC RAM STOP
CNC BG
24" SUPPORT ARMS (PAIR) "SLIDE TYPE"
EXTENDED SUPPORT ARMS (EACH)
DISAPPEARING STOPS
WORK LIGHT
VARIABLE TONNAGE CONTROL
ONE SHOT LUBRICATION
OIL COOLER
LIGHT CURTAIN
OPERATOR STATION PALM CONTROL
ADDITIONAL FOOT PEDAL WITH KEY LOCK
PALM BUTTONS/FOOT CONTROL SYSTEM (HAND BUTTONS TO PRESET HEIGHT,
STOP AND HOLD, FOOT TO CONTINUE TO SHUT HEIGHT)
DOVE TAILS
T-SLOTS
RAM MACHINING 
BED MACHINING FOR ANGLE BRACKETS
ANGLE BRACKETS (PLATE) FOR TOP
ANGLE BRACKETS (PLATE) FOR BOTTOM
INCREASE THROAT GAP OR INCREASE OPEN HEIGHT
INCREASE STROKE LENGTH
KEYLOCK SWITCH
DIE HOLDER-RISER
DIE ROLLOVER BARS (RECOMMENDED FOR 4/WAY DIES)
AIR LIFE (RECOMMENDED FOR 4/WAY DIES)
DUAL CALIBRATION (IN/METRIC)
208 VOLT
SPECIAL PAINT COLORS
BOLT/SHIM KIT FOR LEVELING

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.