Watch Video:

Blanchard 22AD-42, 1995, PROG. AUTO CYCLE, ROTARY SURFACE GRINDERS, VT SPDL (BLANCHARD TYPE)

Price on Request

Make:: Blanchard

Model:: 22AD-42, 1995, PROG. AUTO CYCLE,

Year:: 1995

Ref #:: 177697

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

42" BLANCHARD ROTARY SURFACE GRINDER
 WITH PROGRAMMABLE AUTO CYCLE CONTROLS
 
MODEL:  22AD-42    S/N: 15886     NEW: 1995
 
SPECIFICATIONS: 
CHUCK DIAMETER .................... 42"
SWING INSIDE GUARDS ............... 48" 
VERTICAL RANGE UNDER NEW WHEEL .... 24" 
MAXIMUM LOAD ON CHUCK ............. 3,000 LBS 
GRINDING WHEEL DIAMETER ........... 22" 
GRINDING WHEEL SPEED .............. 720 RPM 
CHUCK SPEEDS (6) .................. 6 TO 24 RPM 
 
FEED SYSTEM: 
RAPID TRAVERSE RATE ............... 20" IPM 
WHEELHEAD JOG RATE ................ 0.100" IPM 
COARSE FEED RATE .................. 0.001" TO .100" IPM 
COARSE FEED MODE .................. CONTINUOUS/IMPULSE 
FINE FEED RATE .................... 0.001" TO .010" IPM 
COARSE TO FINE CHANGEOVER POINT ... 0 TO .009" 
SPARKOUT TIMER .................... 0.1 TO 10 MINUTES 
APPROXIMATE DIMENSIONS .......... 124'L X 8'4"W X 9'7"H 
APPROXIMATE WEIGHT ................ 16,000 LBS 
 
EQUIPPED WITH:
-AUTO-CYCLE PROGRAMMABLE CYCLE CONTROL W/DIGITAL DISPLAY 
-"A" SERIES MACHINE W/ALL ELECTRIC DRIVES 
-HARDENED AND REPLACEABLE BASE WAYS 
-50 HP 3/60/230-460 VOLT SPINDLE MOTOR 
-24" VERTICAL CAPACITY 
-42" ELECTRO-MAGNETIC CHUCK.  PRESENTLY HAS "NEAR NEW" 
  CHUCK LIFE, 3/8" CHUCK LIFE!
-INFINITELY VARIABLE HOLD NEUTROFIER CONTROL. 
-22" DIAMETER SEGMENTED WHEEL (CORTLAND) 
-DY BASE
-"BARNES" MPE-25 COOLANT SYSTEM, WITH BOTH
  PAPER FILTRATION & A MAGNETIC SEPARATOR
-PRESENTLY WIRED FOR 3/60/460 VOLTS, 90 FLA
 
SPECIAL NOTE:  
MACHINE WAS MAINTAINED WELL.  WE CAN PROVIDE YOU
 WITH ACCESS TO THE GENTLEMAN WHO PERFORMED THE
 "PM" AT THE FORMER OWNER'S SHOP.
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE ** 
 
Link to Video: https://youtu.be/qqH1XRdWeq4?si=b6FDdq_IABKzwVNM

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.