Clausing-Colchester 8031 VS "TRIUMPH" ENGINE LATHES

$15,950

Make:: Clausing-Colchester

Model:: 8031 VS "TRIUMPH"

Year:: 1992

Ref #:: 169255

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com

15" x 50" CLAUSING/COLCHESTER 
"PROFESSIONAL SERIES" ENGINE LATHE
MODEL: 8031VS,  S/N: LVT50SILJV 06079, NEW: 1992
 
SPECIFICATIONS:
SWING OVER BED ......................... 15.7"
SWING OVER CROSS SLIDE ................. 9.7"
DISTANCE BETWEEN CENTERS ............... 50"
HOLE THRU SPINDLE ...................... 2.125"
SPINDLE NOSE ........................... D1-6" CAMLOCK
SPINDLE SPEEDS INFINITELY VARIABLE:
    THREE GEARED RANGES ................ UP TO 2500 RPM
HEADSTOCK SPINDLE CENTER TAPER ......... #4 MORSE
TAILSTOCK SPINDLE CENTER TAPER ......... #5 MORSE
TAILSTOCK QUILL DIAMETER ............... 2.8"
TAILSTOCK SPINDLE TRAVEL ............... 5.5"
BED WIDTH  ............................. 12.5"
LONGITUDINAL FEED RANGE ................ .0007" - .08" IPR
CROSS FEED RANGE = HALF OF LONGITUDINAL
ENGLISH THREADING RANGE (56) ........... 2 - 56 TPI
METRIC THREADING RANGE (51) ............ .2 - 14 mm
APPROX DIMENSIONS ...................... 100"L x 45"W x 51"H
APPROX WEIGHT .......................... 3,450 LBS
 
EQUIPPED WITH:
ELECTRONIC VARIABLE SPINDLE SPEED IN THREE GEARED RANGES 
    THROUGH AC INVERTER VARIABLE SPEED DRIVE
INDUCTION HARDENED & PRECISION GROUND BEDWAYS 
A "MOGLICE" COMPOSITE PTFE BASED MATERIAL INJECTED  BETWEEN 
    THE BED & SADDLE PROVIDING FOR LOW FRICTION - MINIMAL
    BEDWEAR - LONGER MACHINE LIFE
UNIVERSAL GEARBOX ALLOWING FOR A COMPREHENSIVE RANGE OF 
    INCH/METRIC THREADS
SONY MODEL: LH32 TWO AXIS DIGITAL READOUT
10" 4-JAW BUCK CHUCK
ALORIS MODEL: CA QUICK CHANGE TOOLPOST WITH HOLDERS
JACOBS DRILL CHUCK FOR TAILSTOCK
THREADING DIAL
MICROMETER CARRIAGE STOP
COOLANT SYSTEM
REMOVABLE CHIP PAN 
10 HORSE POWER SPINDLE DRIVE MOTOR 
 
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.