Edge Tech PATRIOT 551 BAR FEEDS

Price on Request

Make:: Edge Tech

Model:: PATRIOT 551

Year:

Ref #:: 177960

Or call us for a quote at (973) 497-7500 or send us an email at automatics@machineryvalues.com

EDGE TECHNOLOGIES PATRIOT 551 
AUTOMATIC BAR LOADER
NEW: 2011
 
Originally on an Okuma Spaceturn LB3000EX will configure to any CNC Turning Center
 
SPECIFICATIONS:
Capacity  .................. 2"
Bar Length ................. 8'
Length of Spindle Type ..... No
Synch for Sliding Headstock. No
Axial Shift ................ No
Dimensions ................. 128" x 28" x 49"
Weight ..................... 2,200 lbs.
 
Bar Capacity:
   No Prep:                           5mm to 44.5mm (.196" to 1.75")
   With Prep:                         5mm to 51 mm (.196" to 2.000")
Maximum Bar Length:                   8'
Minimum Bar Length:                   39.4"
Maximum Remnant Length:               16"
Magazine Rack Capacity:               12"
Bar Loading Cycle:                    30 seconds for 12' bar
Material Straightness Specifications: .007"TIR/ft of material
                                      (V Blocks, 3 points quidistant)
Feed Force (pusher torque):           max 450N, adjustable
Foward Feed Rate:                     750 inches/min max, adjustable
Return Feed Rate:                     1000 inches/min max, adjustable
Power Consumption:                    1.5kW
Operating Voltage:                    230V/60 Hz - 3 phase
Control Voltage:                      24V DC
Oil Capacity:                         57 liters (15 gallons)
Oil Viscosity:                        ISO 150cST
Compressed Air Supply:                6 bar (90 psi)
Compressed Air Consumption:           approx. 8 liters/loading cycle
Barfeed:                              128" x 28" x 49" 2,100 lbs 
 
Equipped with:
Configured with a 45mm Channel set
(additional channels can be purchased. Price on request)
 
New Replacement $38K

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.