Watch Video:

Hybco 1900, 2100SB MTR'D REL. FIXTURE, COMPARATOR TOOL & CUTTER GRINDERS

Price on Request

Make:: Hybco

Model:: 1900, 2100SB MTR'D REL. FIXTURE, COMPARATOR

Year:: 1988

Ref #:: 162335

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

   HYBCO FORM RELIEVING GRINDER w/OPTICAL COMPARATOR     
  
MODEL:  1900/2100-SB   S/N:  TG-431    NEW:  1988       
                                                         
TABLE WORK SURFACE .................... 6" X 36"  
LONGITUDINAL TABLE TRAVEL ............. 14"  
CROSS TRAVEL .......................... 6-1/2"  
GRINDING SPINDLE, VERTICAL TRAVEL ..... 7-1/4"
HANDWHEELS, GRAD. ..................... 0.0005"  
GRINDER SPINDLE TILT .................. 25° ABOVE & BELOW  
GRINDER SPINDLE INDEXES ............... 360°
GRINDING SPINDLE SPEEDS (2) ........... 3,800 & 6,400 RPM
MAX. GRINDING WHEEL DIAMETER .......... 7"
GRINDING SPINDLE TAPER ................ 3" PER 1 FT.
 
MODEL #2100 MOTORIZED 
 TWO-WAY RELIEVING FIXTURE:
SPINDLE CENTER HEIGHT ................. 7- 1/2"
APPROX. WEIGHT OF MOTORIZED FIXTURE ... 115 LBS.
 
OPTICAL COMPARATOR:
SCREEN DIAMETER ....................... 10"
POSITIONING COMPOUND TRAVELS, 
 CROSS ................................ 2" 
 LONGITUDINAL ......................... 2"
MAGNIFICATION ......................... 20X
                 
APPROX. MACHINE WEIGHT ................ 2,000 LBS.  
                                                         
MACHINE FEATURES:   
FULL CAST IRON CONSTRUCTION
TILTING WHEELHEAD SESIGN (+/- 25 DEGREES)
ROLLER BEARING WAYS (LONGITUDINAL & CROSS)
BALL SCREW FOR WHEELHEAD SLIDE
GEAR BOX FOR LONGITUDINAL TRAVEL - FINE/COARSE SETTINGS 
 
EQUIPPED WITH:                                        
10" NIKON OPTICAL COMPARATOR ATTACHMENT W/LENS & VARIABLE LIGHT 
    INTENSITY CONTROL BOX 
  - GIVES THE OPERATOR A QUICK METHOD OF CHECKING TOOL
    DIAMETERS, LENGTHS, ANGLES, AND RADII RIGHT AT THE
    GRINDING WHEEL WITHOUT REMOVING THE TOOL FROM THE COLLET.  
              
HYBCO MODEL #2100-SB (S/N: RF-1757) TWO-WAY MOTORIZED RELIEVING FIXTURE ON SWIVEL BASE 
"MINARIK" ELECTRONIC VARIABLE SPEED RHEOSTAT CONTROL                                                
HAND OPERATED COLLET CLOSER
THIS WORKHEAD USES ERICKSON #500 COLLETS, LARGER CAPACITY THAN A 5C COLLET TYPE
 
1.5 H.P./3/60/230-460 VOLT WHEELHEAD MOTOR                    
MACHINE IS PRESENTLY WIRED FOR 220 VOLTS
 
AVAILABLE FOR PURCHASE SEPARATELY:
"PRECISE" TYPE SUPER 65 HIGH SPEED INTERNAL GRINDING SPINDLE WITH SPEEDS 
 UP TO 45,000 RPM.  "PRECISE" VARI-SPEED CONTROLLER, MODEL 7302.  
 UNIT INCLUDES BRACKET TO MOUNT ONTO HYBCO GRINDERS.
 
SPECIAL NOTE:
WE CAN PROVIDE A HYBCO No. 2100-SB FORM RELIEVING FIXTURE WHICH USES 5C COLLETS 
 IN LIEU OF THE UNIT PRESENTLY ON THE MACHINE, WHICH USES #500 ERICKSON COLLETS.
 THERE IS NO CHARGE FOR THIS SWAP. 
 
 
LINK TO VIDEO: https://youtu.be/jweqYmTLRMI
                                                         
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
*** ORIGINAL PAINT; EXCELLENT CONDITION & APPEARANCE ***

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.