Watch Video:

Kent SGS-2448AHD, 2016, NC-Z AXIS, 3X AUTO FEEDS, SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Kent

Model:: SGS-2448AHD, 2016, NC-Z AXIS, 3X AUTO FEEDS,

Year:: 2016

Ref #:: 178051

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  24" x 48" KENT USA 3-AXIS AUTOMATIC FEEDS
     COLUMN TYPE SURFACE GRINDER, 
   3-AXIS AUTOMATIC, "NC-Z AXIS WITH
     SERVO MOTOR AND BALL SCREW
 
 
       ** MADE IN TAIWAN **
 
  
MODEL:  SGS-2448AHD    S/N: 105147     NEW: 2016
 
 
MAX. GRINDING CAPACITY .............. 24" X 48" 
DIST. FROM SPINDLE CENTER TO TABLE .. 33.5"
 
LONGITUDINAL TABLE TRAVEL ........... 53.1" 
CROSS TRAVEL ........................ 24.4" 
VARIABLE TABLE SPEED, HYDRAULIC ..... UP TO 83.3' FPM 
AUTOMATIC CROSSFEED INCREMENT ....... 0" TO 1.0" 
RAPID CROSS TRAVERSE RATE ........... 59" IPM
AUTO INCREMENTAL DOWNFEED RANGE  .... 0.0001" TO .0333"
POWER RAPID VERTICAL POSITIONING
 OF GRINDING WHEEL, SPEED ........... 11' IPM
 
SPARKOUT PASSES ..................... 0 TO 9
 
DOWNFEED HANDWHEEL, PER GRADUATION .. 0.0005" 
                   PER REVOLUTION ... 0.020"
CROSSFEED HANDWHEEL, PER GRAD. ...... 0.001" 
                   PER REVOLUTION ... 0.20" 
 
SPINDLE MOTOR ....................... 15 H.P.
SPINDLE SPEED ....................... 1,150 RPM
GRINDING WHEEL .................... 20"D x 3"W x 8"B 
 
APPROX. WEIGHT ...................... 15,950 LBS 
APPROX. MACHINE SIZE ............ 130" x 113"D x 94"H
 
EQUIPPED WITH:
3-AXIS AUTOMATIC FEEDS
NC-Z AXIS, DIGITAL DISPLAY, WITH SERVO MOTOR & BALL SCREW
COLUMN TRAVELS FOR THE CROSS FEED
ELECTRONIC PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED
  (BOTH SURFACE& PLUNGE)  W/SPARKOUT, AUTO WHEEL 
  RETRACTION& TABLE PARK @ COMPLETION OF GRIND CYCLE.
POWER RAPID WHEELHEAD POSITIONING 
HYDRAULIC TABLE TRAVERSE 
ELECTRIC POWER CROSSFEED 
MEEHANITE CAST IRON CONSTRUCTION
TABLE WAYS ARE V & FLAT WAY DESIGN, WITH TURCITE-B FOR 
  LOW FRICTION & INCREASED LIFE
SADDLE WAYS ARE DOUBLE V DESIGN, LINED WITH TURCITE-B
24" x 48" ELECTRO-MAGNETIC CHUCK  
VARIABLE HOLD NEUTROFIER CONTROL
AUTO RECIRCULATING LUBRICATION SYSTEM
EXTERNAL COOLANT SYSTEM WITH PAPER FILTRATION
  AND MAGNETIC SEPARATOR
EXTERNAL HYDRAULIC SYSTEM 
CHILLER UNIT FOR HYDRAULIC FLUID
15 H.P. SPINDLE MOTOR
 
 
 
** ORIGINAL PAINT - EXCETIONAL CONDITION & APPEARANCE **
** MACHINE WAS PURCHASED FROM THE ORIGINAL OWNER'S SHOP ** 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.