Landis 1R, NEW 1991, FULL AUTO CYCLE, UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Landis

Model:: 1R, NEW 1991, FULL AUTO CYCLE,

Year:: 1991

Ref #:: 161573

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

         10" X 20" LANDIS 
HYDRAULIC UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
 
**** MADE IN USA ****
 
  
MODEL: 1R   S/N: 905-30   NEW: 1991 
 
  NOMINAL SWING OVER TABLE ................ 10"
MAXIMUM SWING OVER TABLE .................. 10-7/8" 
NOMINAL DISTANCE BETWEEN CENTERS .......... 20" 
HYDRAULIC TABLE TRAVERSE .................. 2" TO 240" IPM 
TRAVERSE PER TURN OF HANDWHEEL ............ 0.200" 
TRAVERSE HANDWHEEL GRADUATIONS ............ 0.001" 
SWIVEL TABLE GRADUATED .................... 20°, 4" PER FOOT
  
WHEELHEAD: 
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER .. 90° 
WHEEL SIZE ................................ 12" DIAMETER 
MAXIMUM WIDTH, FULL WHEEL ................. 3" 
MAXIMUM HYDRAULIC INFEED - ON DIAMETER .... 0.090" 
RAPID INFEED STROKE ....................... 1" 
MINIMUM FEED GRADUATIONS - ON DIAMETER .... 0.000050" 
WORK DIAMETER REDUCTION PER REVOLUTION 
 OF HANDWHEEL ............................. 0.100" 
WORK DIAMETER REDUCTION PER REVOLUTION 
 OF FINE FEED KNOB ........................ 0.001" 
WHEELHEAD MOTOR ........................... 3 HP 
 
WORKHEAD: 
WORKHEAD SWIVELS TOWARD WHEELHEAD ......... 90° 
WORKHEAD SWIVELS AWAY FROM WHEELHEAD ...... 30° 
WORKHEAD SPINDLE SPEEDS (6) ............... 60 TO 600 RPM 
WORKHEAD SPINDLE NOSE ..................... A2-5" 
WORKHEAD MOTOR ............................ 1/4 HP 
 
APPROXIMATE WEIGHT ........................ 4,150 LBS 
APPROXIMATE DIMENSIONS .................... 8'L X 4'W X 6'6"HT 
 
MACHINE FEATURES:
HYDRAULIC TABLE TRAVERSE
AUTO INFEED @ TABLE REVERSALS 
AUTO PLUNGE FEED 
POWER RAPID WHEELHEAD ADVANCE & RETRACTION 
SPARKOUT TIMER 
DUAL LIVE/DEAD WORKHEAD SPINDLE  
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS 
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED 
MACHINE MOTORS ARE 3/60/230-460 VOLT 
 
EQUIPPED WITH:
COLLET CHUCK
FACE PLATE
DRESSER
COOLANT
 
SPECIAL NOTE:
THIS MACHINE LEFT THE FACTORY EQUIPPED WITH A SWING DOWN 
 I.D. GRINDING ATTACHMENT.  THE MACHINE IS THUS ALREADY
 WIRED FROM THE FACTORY TO ACCEPT THE ATTACHMENT.
 WE HAVE A LANDIS 1R SWING DOWN I.D. GRINDING ATTACHMENT WITH 
 A I.D. SPINDLE AVAILABLE IN STOCK.  PRICE TO ADD THIS ACCESSORY
 COMPLETE AND INSTALLED ON THE MACHINE IS $5,000. 
 
 
** "EXCEPTIONAL" CONDITION & APPEARANCE ** 
**** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE ****

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.