Watch Video:

Myford MG12-M, NEW 1988, TRAK 2X DRO, PLAIN CYLINDRICAL GRINDERS

Price on Request

Make:
Myford
Model:
MG12-M, NEW 1988, TRAK 2X DRO,
Year:
1988
Ref #:
156859

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com


   5" X 12" MYFORD HIGH-PRECISION PLAIN HAND FEED
                   CYLINDRICAL GRINDER                   
                                                                          
   MODEL: MG12-M    S/N: SM-161689     NEW: 1988      
                                                         
MAXIMUM GRINDING DIAMETER ............................ 3"  
SWING OVER TABLE ..................................... 5"  
CAPACITY BETWEEN CENTERS ............................. 12"  
MAXIMUM TABLE TRAVEL ................................. 13-1/2"  
TABLE SWIVELS EITHER WAY ............................. 7 DEGREES  
TABLE TRAVEL PER REV. OF HANDWHEEL ................... 2.04"/0.51"  
 
                                                         
WHEELHEAD (ALL GRADUATIONS, ON WORK DIAMETER):           
 TOTAL TRAVEL BY FEED SCREW .......................... 3-7/8"   
 HYDRAULIC RAPID RETRACTION .......................... 1-1/8"   
 INFEED PER REV. OF HANDWHEEL ........................ 0.04"  
 WHEEL FEED GRADUATION ............................... 0.0002"
 FINE FEED ADJUSTER (NUMBERED DIVISIONS) ............. 0.0001"
 FINE FEED TO DEAD STOP .............................. 0.00005"  
 WHEEL SPEEDS (2) .................................... 1830 & 1988 RPM  
 GRINDING WHEEL ...................................... 12" X 1-1/2" X 5"  
 MINIMUM WHEEL DIAMETER FOR ZERO WORK DIAMETER ....... 10- 1/8"  
                                                        
WORKHEAD:                                               
 SPINDLE SPEEDS, INFINITELY VARIABLE ................. 50 TO 900 RPM  
 CAPACITY THRU STANDARD DRAW TUBE .................... 3/4"  
 MAXIMUM COLLET CAPACITY ............................. 3/4"  
APPROXIMATE WEIGHT ................................... 1,490 LBS
                                                        
EQUIPPED WITH:                                          
 HAND FEEDS
 12" GRINDING WHEEL
 STANDARD MYFORD NON-SWIVELLING WORKHEAD, WORKHEAD SPINDLE IS "LIVE" & "DEAD"
 DRAW BAR, WITH ADAPTOR PLATE & 5" 3-JAW CHUCK
 "TRAK" TWO-AXIS DIGITAL READOUT, .0001" RESOLUTION               
 AUTOMATIC LUBRICATION FOR WHEELHEAD AND CARRIAGE WAYS
 ELECTRICAL CONSOLE ATTACHED TO MACHINE                   
 COOLANT SYSTEM
 3 H.P./3/60/230-460 VOLT WHEELHEAD MOTOR
 MACHINE IS PRESENTLY WIRED FOR 220 VOLTS
          
 
** SWING DOWN I.D. ATTACHMENT W/SPINDLE AVAILABLE FOR AN
  ADDITIONAL $2,950 **
 
 
SPECIAL NOTE:
STANDARD MYFORD NON-SWIVELING WORKHEAD WITH DUAL LIVE & DEAD WORKHEAD SPINDLE
 CAN BE SUBSTITUTED IN LIEU OF THE MYFORD SWIVELING WORKHEAD WITH LIVE SPINDLE ONLY
 THAT IS PRESENTLY WITH THIS MACHINE.  THERE NO CHARGE FOR THIS SUBSTITUTION.
                                                        
* *  EXCELLENT CONDITION & APPEARANCE (ORIGINAL PAINT)  * *             
 **INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE**

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.

Similar Machines

We're here to help

Looking for a specific machine?

Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice: (973) 497-7500
Fax: (973) 497-7501
Email
sales@machineryvalues.com
Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice:
(973) 497-7500
Fax:
(973) 497-7501
image description

Buy on ebay

Shop now

Get Financing

Apply now