Pressmaster 4PP-100 HYDRAULIC PRESSES, 4 POST, ETC.

$73,950

Make:: Pressmaster

Model:: 4PP-100

Year:: NEW

Ref #:: 157854

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

 
100 TON PRESSMASTER HYDRAULIC FOUR-POST PRESS 
MODEL 4PP-100
 
TONS OF FORCE ............................... 100 TONS 
RAM SPEED (APPROACH) ........................  85 IPM 
          (PRESS) ...........................  10 IPM 
          (RETURN) .......................... 106 IPM
TABLE ..............(L-R X F-B).............. 34" X 30" 
UPPER PLATEN (L-R)........................... 34"
UPPER PLATEN (F-B)........................... 30"
DAYLIGHT .................................... 22" 
STROKE ADJUSTABLE ........................... 15" 
FLOOR TO TABLE .............................. 33-1/2"
FRONT TO BACK................................ 56-1/2" 
HEIGHT (OVERALL)............................. 92" 
WIDTH ....................................... 71-1/2" 
WEIGHT ...................................... 9,800 LBS.
SHIPPING DIMENSIONS ......................... 60" X 86" X 102"
MOTOR HP @ 1760 RPM ........ 10 HP 230/460/575 VOLTS, 3 PH, 60 Hz. 
 
STANDARD FEATURES:
- PRESSURE GAUGE 
- PRESSURE REGULATOR 
- ADJUSTABLE STROKE CONTROL 
- PRESSURE REVERSAL SWITCH
- ADJUSTABLE SPEED CONTROL
- AIR COOLED INDUSTRIAL OIL COOLER
- RAM TRAVEL IS GUIDED BY 4 PRECISION-GROUND CHROMED RODS 
- JOG MODE USED FOR SIMPLIFYING SETUPS 
- DUAL CONTROL WITH YOUR CHOICE OF USING: 
   (1) MOVEABLE PEDESTAL C/W DUAL ELECTRIC PALM BUTTONS    & EMERGENCY STOP OR (2) PALM BUTTONS
- PLC PROGRAMMABLE CONTROL SYSTEM
- 10 HP LOW SPEED BALDOR ELECTRIC MOTOR
- ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD 
IN THE INDUSTRY, AND AVAILABLE THROUGHOUT NORTH AMERICA
- ONE YEAR WARRANTY ON ALL PARTS
- MFG. IN NORTH AMERICAN FROM US & CANADIAN COMPONENTS
 
AVAILABLE OPTIONS:
- T-SLOTTING .......... (PER LINEAR INCH) .................... $20
- ABB HMI PROGRAMMABLE CONTROL REPLACING STANDARD CONTROL .... $10,800
Example of HMI capabilities:
Product 1 
- Ram down to 10"
- Dwell for 3min. 
- Ram up 5" inches and wait.
Product 2 
- Ram down to 8.5"
- Dwell for 4min. 
- Wait 30sec
- Press again for 2min 
- Ram up 6" inches and wait.
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.