Pressmaster CFP-100 HYDRAULIC C-FRAME PRESSES

$74,950

Make:: Pressmaster

Model:: CFP-100

Year:: NEW

Ref #:: 125015

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

 
100 TON PRESSMASTER HYDRAULIC C-FRAME PRESS
MODEL CFP-100    *BRAND NEW DESIGN*
 
RATED CAPACITY .............................. 100 TONS
SPEED (APPROACH) ............................ 80 IPM 
      (PRESSING) ............................ 10
      (RETURN) .............................. 106
TABLE WIDTH ................................. 34"
TABLE DEPTH ................................. 20"
U-SLOT WIDTH ................................ 4"
DAYLIGHT .................................... 20.5"
FULL STROKE ................................. 15"
THROAT ...................................... 13"
TABLE HEIGHT ................................ 34.5"
TOTAL DEPTH ................................. 58"
TOTAL HEIGHT ................................ 102"
TOTAL WIDTH ................................. 38"
CLEARANCE ................................... 6"
PLATEN WIDTH ................................ 34"
PLATEN DEPTH ................................ 20"
MOTOR ....................................... 10 HP
AVAILABLE VOLTAGES ............ 230/460/575 / 3 PH / 60 Hz.
 
STANDARD FEATURES: 
- PRESSURE GAUGE 
- PRESSURE REGULATOR 
- ADJUSTABLE SPEED CONTROL
- ADJUSTABLE STROKE CONTROL
- PRESSURE REVERSAL SWITCH
- RAM TRAVEL IS GUIDED BY PRECISION-GROUND GUIDE RODS  
- JOG MODE USED FOR SIMPLIFYING SETUPS 
- DUAL CONTROL - YOUR CHOICE OF USING (1) MOVABLE PEDESTAL C/W 
   DUAL ELECTRIC PALM BUTTONS AND EXTRA EMERGENCY STOP (2) FOOT PEDAL. 
- PLC PROGRAMMABLE CONTROL SYSTEM
- QUALITY BALDOR LOW SPEED MOTOR
- AIR COOLED INDUSTRIAL OIL COOLER
- ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD IN THE INDUSTRY,
   AND AVAILABLE THROUGHOUT NORTH AMERICA. 
- ONE YEAR WARRANTY 
- MANUFACTURED IN NORTH AMERICA 
 
O.A. 64"L X 59"W X 110"H, WT. 11,600#
 
AVAILABLE OPTIONS:
- FULL LIGHT CURTAIN GUARDING AROUND THREE SIDES .............. $16,450
- T-SLOTTING .......... (PER LINEAR INCH) ..................... $    20
 
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.