Pressmaster CFP-50 HYDRAULIC C-FRAME PRESSES

$73,950

Make:: Pressmaster

Model:: CFP-50

Year:

Ref #:: 178017

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

Central Moloney
Jason Burnside
2400 West 6th Ave.
Pine Bluff, Arkansas 71601
 
 
50 TON PRESSMASTER C-FRAME HYDRAULIC PRESS 
MODEL CFP-50 BRAND NEW - CUSTOM MADE
                 
 
TONS OF FORCE ......(MAX).................... 50 TONS 
APPROACH SPEED .............................. 140 IPM
PRESS SPEED ................................. 17 IPM
RETURN SPEED ................................ 210 IPM
TABLE ..............(LR X FB)................ 12" X 11" 
PEDESTAL ...........(LR X FB)................ 8" X 22" 
DAYLIGHT .................................... 20.5" Approx.
MAX. STROKE ADJUSTABLE ...................... 15" 
THROAT ...................................... 22"
FLOOR TO TABLE .............................. 44" 
UPPER PLATEN .......(LR X FB)................ 34" X 20" 
MOTOR HP @ 1750 RPM ......................... 10 HP
 
VOLTAGE AVAILABLE: 230 / 460 / 575 / 3 PH. 60 HZ
 
SPECIAL FEATURES:
- REMOTE POWER PACK WITH 12' OF HOSE
- BOLT HOLE PATTERN ON BED AND RAM AS PER CUSTOMER DRAWING
 
STANDARD FEATURES: 
- PRESSURE GAUGE 
- PRESSURE REGULATOR 
- ADJUSTABLE SPEED CONTROL
- ADJUSTABLE STROKE CONTROL
- PRESSURE REVERSAL SWITCH
- RAM TRAVEL IS GUIDED BY 4 PRECISION-GROUND CHROMED RODS
- JOG MODE USED FOR SIMPLIFYING SETUPS
- DUAL CONTROL-YOUR CHOICE OF USING: 
(1) MOVEABLE PEDESTAL C/W DUAL ELECTRIC PALM BUTTONS & EXTRA EMERGENCY STOP
OR (2) FOOT PEDAL
- P.L.C. PROGRAMMABLE CONTROL SYSTEM
- QUALITY BALDOR MOTOR, LOW SPEED
- AIR-COOLED INDUSTRIAL OIL COOLER
- ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD IN THE INDUSTRY, AND AVAILABLE
THROUGHOUT NORTH AMERICA
- FULL ONE YEAR WARRANTY ON ALL PARTS
 
WEIGHT ................................ 6,600# Approx.
APPROX. SHIPPING DIMS ................... 66"L x 52"W x 96"H
 
 
SPECIAL NOTE:
Machine will be a copy of previous press sold to Central Maloney in June of 2022. (see attached drawing).
 
DELIVERY:
Approx. 6-8 Weeks After Customer Signs off on Approval Drawings

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.