Pressmaster HFP-300/MWH HYDRAULIC H-FRAME PRESSES

$84,950

Make:: Pressmaster

Model:: HFP-300/MWH

Year:: New

Ref #:: 156912

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

 
300 TON PRESSMASTER HYD. H-FRAME PRESS
MODEL HFP-300 MWH          NEW AND IN STOCK
 
RATED CAPACITY, TONNAGE.......................... 300
STROKE........................................... 20"
BORE............................................. 14"
RAM SPEED (Inches/Minute) ADVANCE ............... 18
RAM SPEED (Inches/Minute) RETURN ................ 22
RAM SPEED (Inches/Minute) PRESSING .............. 4
DAYLIGHT ........................................ 29"
DISTANCE BETWEEN POSTS (RIGHT TO LEFT)........... 60"
DISTANCE BETWEEN POSTS (FRONT TO BACK)........... 24"
 
OVERALL HEIGHT .................................. 103"
OVERALL WIDTH ................................... 96"
OVERALL DEPTH ................................... 60"
WEIGHT .......................................... 12,800
 
NOT A CHEAP IMPORT -
MANUFACTURED IN CANADA WITH QUALITY US & CANADIAN COMPONENTS
 
MOVEABLE WORKHEAD.
CYLINDER ACTIVATION - IS FINGER TIP CONTROLLED THE MORE THE HAND LEVER
IS ENGAGED THE MORE THE RAM MOVEMENT IS ACCELERATED. THIS ALLOWS THE
 OPERATOR TO CONTROL THE PROPER SPEED FOR THE TASK.
PRESSURE REGULATOR - TO LIMIT RAM PRESSURE
ELECTRIC/HYDRAULIC OPERATION FOR SMOOTH CONSISTENT PRESSING ACTION.
OPEN SIDES TO FACILITATE WORK ON LONG PIECES
FLAT RAM NOSE TO ALLOW USER TO ADAPT THE PRESS TO A SPECIFIC JOB.
QUALITY LOW SPEED BALDOR 10 HP - 3 PHASE MOTOR 
SELF LOCKING TABLE DESIGN ELIMINATES LATERAL MOVEMENT.
HIGH CAPACITY 20 GALLON OIL RESERVOIR.
DOUBLE ACTING CYLINDER PERMITS PULLING AS WELL AS PRESSING RAM ACTION.
HYDRAULIC POWER LIFT FOR VERTICAL DISPLACEMENT OF TABLE.
LOW PRESSURE SYSTEM - MAINTAINS LOWER OIL TEMPERATURES, RESULTING IN
 HIGHER EFFICIENCY AND SAFER OPERATION.
ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD IN THE INDUSTRY AND
 AVAILABLE THROUGHOUT NORTH AMERICA.
FULL ONE YEAR WARRANTY.
STANDARD VOLTAGES AVAILABLE-PLEASE SPECIFY WHEN ORDERING.
 
AVAILABLE OPTIONS:
- SET OF V-BLOCKS ............................ $2,000
- STOP / START & EMERGENCY STOP .............. $1,000
- FRONT OR BACK SAFETY GUARD .....(PER SIDE).. $1,000
- SIDE SAFETY GUARD ..............(PER SIDE).. $  750 
- FOOT PEDAL ................................. $4,250
- ADJ. STROKE CONTROL C/W FOOT PEDAL ......... $6,250
- PRESS PLATE ................................ $5,400
- COMPREHENSIVE SAFETY PACKAGE WITH EMERGENCY STOPS AND 
LEXAN GUARDING ............................... $9,000
- HANDHELD REMOTE CONTROL .................... $7,500
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.