Scotchman DO 135/220-24M *Made in the USA* NEW IRONWORKERS

Price on Request

Make:

Scotchman

Model:

DO 135/220-24M *Made in the USA*

Year:

NEW

Ref #:

144670

Get a quote

Get financing

Or call us for a quote at (973) 497-7500 or send us an email at rl@machineryvalues.com

---

NEW SCOTCHMAN 135 TON IRONWORKER

MODEL: DO 135/220-24M

 

*MADE IN THE USA*

 

STANDARD FEATURES:

Dual operator allows for two operators to work at the same time at full capacity

135-ton punch station (1-11/16" in 1")

Keyed punch ram for safety

12" throat depth

Punch gauging table with fence and scale

Die holders- 2", 2-1/2", and 3"

Punch nut with wrench and stripper

Adjustable swing-away stripper

One round punch & die: max. diameter 1-1/4"

Punch jog control

Two adjustable electric stroke controls with scale

Two electric remote foot pedals

Two 2-stage hydraulic pumps

Two valves

Angle shear capacity @ 90 degrees: 6" x 6" x 1/2"

Rectangle notcher 3" x 5-3/4" x 1/2"

Notcher table with guides

220-ton, 24" flat bar shear with sabre blade

Shear table with miter fence

Tool table work area

Slug receptacles

Electrical box supplied with emergency palm button and lock-out tag-out accommodations

230/460 volt/3-ph electrics (must specify voltage)

All guards necessary to comply with ANSI B 11-5 standards

Forklift accommodations

3 year warranty on parts

 

CAPACITIES AND SPECIFICATIONS:

RATED ON A36 MILD STEEL/65,000 PSI TENSILE

 

Punching capacity .................................. 135 ton (122 mt)

                  .................................. 1-11/16" in 1" (43 mm in 25 mm)

Special tooling .................................... 4" max. dia. (100 mm max. dia.)

Throat depth ....................................... 12" (300 mm)

Flat bar shear     ................................. 220 ton, 24" length (600 mm)

(sabre blade-std.) ................................. 1" x 12" (25 x 300 mm)

                   ................................. 3/4" x 20" (18 x 500 mm)

                   ................................. 1/2" x 24" (12 x 600 mm)

Angle shear

 90 degrees ........................................ 6" x 6" x 1/2" (150 x 150 x 12 mm)

 45 degrees ........................................ 3" x 3" x 3/8" (75 x 75 x 10 mm)

 (w/Bar shear) ..................................... 4" x 4" x 1/2" (100 x 100 x 12 mm)

Brake 12" .......................................... 90 ton (81.6 mt)

Brake 24" .......................................... 70 ton (63.5 mt)

Open end brake ..................................... Max. 1/4" x 5" (6 x 125 mm) flat or angle iron

Pipe notcher ....................................... 3/4", 1" (19 mm, 25 mm)

Schedule 40  ....................................... 1-1/4" (32 mm)

             ....................................... 1-1/2", 2" (38 mm, 50 mm)

90 degree V-notcher ................................ 6" x 6" x 5/16" (150 x 150 x 8 mm)

Rectangle notcher .................................. 3" x 5-3/4" x 1/2" (75 x 145 x 12 mm)

V-notch ............................................ 3" x 3" x 1/2" (75 x 75 x 12 mm)

Notching in leg of channel ......................... 6" to 10" (150 mm to 250 mm)

Channel shear ...................................... 2" to 6" adj. (50 mm to 150 mm)

Strut shear ........................................ samples required

Rod shear

 Round rod (max.) .................................. 1/4" to 1-1/4", 9 cavity (6 mm to 32 mm)

 Square rod (max.) ................................. 1/4" to 1", 1 cavity (6 mm to 25 mm)

Square tube shear .................................. 1/2" to 2", 12 gauge (12 mm to 50 mm, 2.75 mm)

Picket tool ........................................ 1/2", 3/4", 1" (12 mm, 19 mm, 25 mm)

            ........................................ 16 gauge (1.6 mm)

Offset die holder .................................. Max. 40 ton (36 mt)

Strokes per minute

 In light material ................................. 47 spm (1/4" stroke) [punch station]

 In heavy material ................................. 16 spm (3/4" stroke) [punch station]

Hydraulics ......................................... 3,500/3,500 psi (207/207 bar)

 

Motor

 Standard .......................................... 10 hp 3 ph (7.46 kW) 230/460/208/380/575v

 Optional .......................................... 10 hp 1 ph (7.46 kW) 230v

 

Dimensions ......................................... 77-1/4" L x 34" W x 74-1/4" H

           ......................................... (174 cm x 119 cm x 187 cm)

 

Shipping weight .................................... 6,404 lbs. (2,904 kg)

 

OPTIONAL STANDARD TOOLING (CALL FOR PRICING):

12" & 24" brake

Open end brake

Pipe notcher

90 degree V-notcher

Rectangle notcher

6" x 6" die holder

Channel shear

Tube shear

Rod shear

Picket tool

Offset die holder

Unequal leg angle blades

Punch slug receptacle

Strut shear

Urethane stripper

Brake length gauge with scale (12" & 24" brakes)

Brake table with scale & squaring arm (12" & 24" brake)

Multi-loc punch gauging table (36" and 85" extensions available)

48" back gauge

Hydraulic hold-down

Laser light

Tool table extension with punch and die storage

24" x 5' conveyor with angle iron support

Punch table extension

 

*We will meet or beat virtually any price on the web. We also offer special financing deals with integrated discounts for qualified customers.

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.