Sharp 34120M HOLLOW SPINDLE ENGINE LATHES

Price on Request

Make:: Sharp

Model:: 34120M

Year:: NEW

Ref #:: 168852A

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com

NEW 34" x 120" SHARP BIG BORE LATHE
MODEL: 34120M (20”) LATHE
 
SPECIFICATION:
CAPACITY
SWING OVER BED .................. 33.85”
SWING OVER CROSS SLIDE .......... 21.25”
DISTANCE BETWEEN CENTERS ........ 118.1”
BED
SWING OVER GAP .................. 47.22”
WIDTH OF BED .................... 20”
WIDTH OF GAP (SPINDLE END FACE).. 9.45”
LENGTH OF BED ................... 208.7”
HEADSTOCK
SPINDLE BORE DIAMETER ........... 6”
NUMBERED OF SPINDLE SPEEDS ...... 12 STEPS
RANGE OF SPINDLE SPEEDS ......... 16-810 R.P.M.
SPINDLE NOSE .................... A2-11
CARRIAGE
WIDTH OF CARRIAGE ............... 26”
CROSS SLIDE TRAVEL .............. 20.08”
COMPOUND REST TRAVEL ............ 14.57”
MAX. SIZE CUTTING SIZE .......... 1.26” X 1.26”
TAILSTOCK
QUILL DIAMETER .................. 4.5”
QUILL TRAVEL .................... 11.8” 
QUILL TAPER ..................... MT#6
THREADS
LEADSCREW DIAMETER & PITCH ...... 1.77” X 2 T.P. I.
RANGE OF METRIC PITCH ........... 65 NOS ( 0.8 -14 MM)
RANGE OF INCH PITCHES ........... 36 NOS (2- 28 TPI)
RANGE OF DIAMETRICAL PITCHES .... 36 NOS ( 4-56 DP)
RANGE OF MODULE PITCHES ......... 22 NOS ( 0.5 – 7  MP)
FEEDS
FEED ROD DIAMETER ............... 1.26”
RANGE OF LONGITUDINAL FEEDS ..... 0.0020” – 0.028” IN/REV
RANGE OF CROSS FEEDS ............ 0.0010” – 0.14” IN/REV
MOTOR
MAIN SPINDLE MOTOR .............. 20 HP
COOLANT PUMP MOTOR .............. 1/8 HP (0.1 KW)
RAPID MOTOR                                                                                                            ¼ HP
GENERAL
MACHINE DIMENSION (L X W X H) ...  224”  X 81” X 57.1”
MACHINE WEIGHT (APPROX.) ........  19,360 LBS
 
STANDARD EQUIPMENT: 
COOLANT DEVICE
X, Z – AXES AUTO LUBRICATION SYSTEM
METRIC/INCH GEAR BOX
COOLANT DEVICE
LONGITUDINAL ADJUSTABLE POSITION FEED STOP
TAILSTOCK , TWO STEPS DEVICE
3 JAW SCROLL CHUCK SC 12”
BACK PLATE OF CHUCK
X, Z – AXES WITH TURCITE-B
STEADY REST 11.5”, BEARING TYPE (GRIP RANGE 20-260 MM)
DEAD CENTER
CENTER SLEEVE MT#5
4 –WAY TOOL POST & TOOLPOST SCREW WRENCH
LEVEL PADS
TOOLS AND TOOL BOX
OPERATION MANUAL
SPINDLE MOTOR : 20 HP
 
FEATURES:
 
IT IS SUITABLE FOR TURNING AND CUTTING OF LARGE WORK PIECES AND STEEL ROD MATERIALS FOR HEAVY INDUSTRIES LIKE OIL PIPE NETWORK, AEROSPACE AND HEAVY-DUTY SHAFT PROCESSING.
 
1. CASTING:
 1. ONE PIECE CASTING WORK WITH REINFORCED INNER STRUCTURE, EXTRA 3RD SUPPORT TO BE SUITABLE FOR PROCESSING OF LARGE WORK PIECE AND ENHANCED HEAVY-DUTY CUTTING ABILITY.
 2. THE REMOVABLE GAP HAS BUILT IN REINFORCED STRUCTURE AND DOES NOT AFFECT ANY CUTTING STABILITY.
 
2. SPINDLE:
 1. BORE 6 “, 16-STEP SPEED CHANGE, TURBINE SPEED CHANGE MECHANISM WITH NO EASY SPEED JUMPING AND THREE POINT SUPPORT FOR THE BOX.
 2. FITTED WITH ADJUSTABLE, ELECTROMAGNETIC BRAKE FOR EASY BRAKING ADJUSTMENT ACCORDING TO DIFFERENT WORK PIECE MATERIALS AND SPEED.
 3. GEAR AND SHAFT ARE MADE OF SUPER ALLOY MATERIAL WITH FAG BEARINGS TO OFFER DURABLE CUTTING AND LOW PRODUCTION NOISE.
 4. SEALED OIL BATH LUBRICATION SYSTEM WITH ENFORCED OIL SUPPLY BY MECHANICAL PUMP TO ACHIEVE BETTER LUBRICATION EFFECTS.
 
3. GEAR BOX:
 METRIC / INCH GEAR BOX FREE FROM GEAR EXCHANGE TO IMPROVE PRODUCTION EFFICIENCY. SPEEDY INSTALLATION, FORWARD AND REVERSE MOVEMENT, SAFETY INSTALLATION WITH AUTOMATIC SEALED OIL BATH LUBRICATION SYSTEM.
 
4. APRON FEEDING DEVICE:
 SWIFT TRANSMISSION, POSITIVE AND NEGATIVE ROTATION MOVEMENT AND SAFETY DEVICE WITH AUTO SEALED OIL BATH LUBRICATION & CROSS RAPID FEEDING.
 
5. SADDLE:
 ANTI-FRICTION PROCESSED SURFACE WITH REGULAR OIL INJECTION, LUBRICATED AND FRICTION ENDURABLE.
 
6. TAILSTOCK: 
 TWO STAGE IN-FEED DEVICE, SWING ARM MOVEMENT TO HAVE SMOOTH AND LABOR SAVING OPERATION.
 
7. ELECTRICAL CONTROL:
 2 STAGE SAFETY START-UP DEVICE AND OVERLOADING POWER CUT SYSTEM.
 
8. CASTINGS:
  FC-30 STEEL IS USED FOR MAIN STRUCTURES LIKE BASE, SPINDLE, SADDLE AND TAILSTOCK, WHICH ARE ANNEALED AND HAVE NO DEFORMATION.
 
9. PROCESSING:
 BASE, SPINDLE, SADDLE, SLOT SURFACE OF TRAVELING PLATE, TOOL BASE SLIDING TABLE, TAIL SHAFT PIPE ARE HIGH FREQUENCY TREATED, PRECISION GROUND FOR EXTENDED SERVICE LIFE.
 
10. HEADSTOCK: 
 GEAR AND SHAFT ARE MADE OF SUPER ALLOY MATERIAL WITH FAG BEARINGS TO OFFER DURABLE CUTTING AND LOW PRODUCTION NOISE, TURBINE SPEED CHANGE MECHANISM WITH AN EASY SPEED JUMP. THREE POINT SUPPORT FOR THE BOX.
 
11. ELECTRIC BOX
     2 STAGE SAFETY START-UP DEVICE, DURABLE CUTTING AND LOW PRODUCTION NOISE. OVERLOADNG POWER CUT SYSTEM, FILTERED WITH ADJUSTABLE , ELECTROMAGNETIC BRAKE FOR EASY BRAKING ADJUSTMENT ACCORDING TO DIFFERENT WORK PIECE MATERIALS AND SPEED.            
 
OPTIONAL ACCESSORIES:
• FOLLOW REST,  BRONZE JAWS ( GRIP RANGE 30 MM TO 150 MM)
• REAR CHUCK ADAPTER
• BACK SPLASH GUARD 
• STEADY REST WITH BEARING 15” ( GRIP RANGE 170 - 370 MM) 
• STEADY REST WITH BEARING 20” ( GRIP RANGE 220 -  480MM)
• STEADY REST WITH BEARING 24” ( GRIP RANGE 300 - 600 MM)
• TAPER ATTACHMENT( 450 MM TRAVEL, +/- 8 DEGREES)
• 3-JAW STRONG SCROLL CHUCK SK -16” ( 160 MM BORE), A2-11 WITH BACK PLATE , ID RANGE 110-360 MM. OD: 30-380 MM  
• 4-JAW INDEPENDENT CHUCK, CAST IRON A2-11-20” ( 160 MM BORE) MADE IN CHINA 
• 4-JAW INDEPENDENT CHUCK, A2-11-25” (DIRECT MOUNTED TYPE, 180 MM BORE) MADE IN CHINA 
• HALOGEN LIGHT 
• FAGOR 20 I DRO FOR 2 X   
• NEWALL NMS 800 DRO FOR 2 X  
• DRO INSTALLATION

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.