NEW SHARP 6" X 18" HAND FEED
PRECISION SURFACE GRINDER
MODEL: SG618-2A
SPECIFICATIONS:
CAPACITY
MAXIMUM GRINDING LENGTH ........................ 19.7”
MAXIMUM GRINDING WIDTH ......................... 5.9”
MAXIMUM DISTANCE- TABLE TO SPINDLE CENTER ...... 16”
TABLE
WORKING SURFACE (W X L) ........................ 6”X 18.3”
MAXIMUM LONGITUDINAL TRAVEL .................... 21.6”
MAXIMUM CROSS TRAVEL ........................... 7”
FEED
LONGITUDINAL MOVEMENT OF TABLE
HYDRAULIC FEED ................................ 3.3 – 83FPM
HAND FEED PER REVOLUTION ....................... 2.7”
CROSS MOVEMENT OF SADDLE
INTERMITTENT FEED .............................. 0.006 – 0.4”
CONTINUOUS TRAVERSE FEED ....................... 47 IPM
HAND FEED PER REVOLUTION ....................... 0.02”
GRADUATION OF HAND WHEEL ....................... 0.001”
VERTICAL MOVEMENT OF WHEEL HEAD
HAND FEED PER REVOLUTION ....................... 0.05”
GRADUATION OF HAND WHEEL ....................... 0.0001”
SPINDLE AND WHEEL
SPINDLE MOTOR .................................. 2 HP
SPINDLE SPEED .................................. 3,600 RPM
GRINDING WHEEL OUTSIDE DIAMETER ................ 8”
GRINDING WHEEL BORE ............................ 1.25”
GRINDING WHEEL WIDTH ........................... 0.63”
GENERAL
MOTOR (HYDRAULIC) .............................. 1 HP
FLOOR SPACE (WXHXL) ............................ 83”x51”x71”
NET WEIGHT ..................................... 2,100 LBS
SPECIFICATIONS MAY BE CHANGED OR IMPROVED WITHOUT NOTICE.
TOTAL POWER CONSUMPTIONS
220V ........................................... 2KVA/5 AMPS
440V ........................................... 2 KVA/ 2.5 AMPS
STANDARD EQUIPMENT:
• GRINDING WHEEL (8” X 0.63” X 1.25”)
• KANETSU CHUCK (PERMANENT) WITH COOLANT SYSTEM (12 GAL) & SPLASH GUARD
• AUTO LUBE SYSTEM
• WHEEL ADAPTER/FLANGE
• WHEEL BALANCING ARBOR
• WORK LIGHT
• DIAMOND DRESSER
• BALL SCREW ON CROSS AXIS
• WIRED 220V OR 440V. PLEASE SPECIFY
• TOOL KIT INCLUDES:
MACHINE MANUAL, HALF NUT WRENCH, WRENCH 17M, 19M, SET OF 6 ALLEN WRENCHES, PHILLIP SCREW DRIVER, OIL CAN, GREASE GUN, REAR WAY COVER BRACKET, PIN FOR INDICATOR, AND CAN OF PAINT
FEATURES:
• DOUBLE “V” WAYS FOR CROSS TRAVEL
• ONE “V” WAY AND ONE FLAT WAY FOR LONGITUDINAL TRAVEL
• BOTH WAYS ARE HAND-SCRAPED AND COVERED WITH TURCITE B COATING
• ACCURATE SLOT GRINDING ACHIEVED USING SADDLE LOCKING SYSTEM COMBINED WITH CROSS FEED BALLSCREW
• AUTOMATIC LUBRICATION SYSTEM
• ADVANCED HYDRAULIC SYSTEM WITH INDEPENDENT OIL TANK PROVIDES VIBRATION-FREE TABLE MOVEMENT
• HYDRAULIC TABLE STROKE SETTING
OPTIONAL ACCESSORIES:
• 6X18 KANETSU PERMANENT MAGNETIC CHUCK (FINE POLE), IN LIEU OF KANETSU CHUCK (PERMANENT)
• 6X18 KANETSU ELECTRO-MAGNETIC CHUCK W/CONTROL( FACTORY ORDER) IN LIEU OF KANETSU CHUCK (PERMANENT)
• 6X18 KANETSU ELECTRO-MAGNETIC CHUCK W/CONTROL (FINE POLE) FACTORY ORDER, IN LIEU OF KANETSU CHUCK (PERMANENT)
• 6X18 WALKER ELECTRO-MAGNETIC CHUCK (FINE POLE), W/ SMART-1C CONTROL, IN LIEU OF KANETSU CHUCK (PERMANENT)
• PARALLEL DRESSER
• BALANCE STAND
• EXTRA WHEEL ADAPTER (FLANGE)
• DUST COLLECTOR
COOLANT SYSTEM W/MAGNETIC SEPARATOR & PAPER FILTER
(25 GAL), 220V/440V
• COOLANT SYSTEM W/MAGNETIC SEPARATOR & PAPER FILTER
(25 GAL), 380V (FOR INTERNATIONAL USE)
• CSA/UL COMPONENTS UPGRADE
DIGITAL READOUT SYSTEMS:
• FAGOR 20I D.R.O. FG-SG618
• FAGOR 40I D.R.O. FG-40I-SG618
• ACU-RITE 203S D.R.O. AR-SG618