Sharp SH-2060-2A NEW SURFACE GRINDERS

Price on Request

Make:

Sharp

Model:

SH-2060-2A

Year:

NEW

Ref #:

136878

Get a quote

Get financing

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

---

NEW Sharp SHT-2060-2A Hydraulic Grinder

 

 

STANDARD EQUIPMENT:

Coolant System (25 Gal.)

Wheel Balancing  Stand & Arbor

Ballscrew on Cross Feed

Electronic Crossfed & Stroke Setting

Wheel Flange

Grinding Wheel (14” x 2 “ x 5”)

Auto Lube System

Spindlehead Rapid Up & Down

Wired 220V or 440V.  Please specify

Splash guard both front and back ( not shown on photo)

Tool Kit

 

 ** note, please order one of the magnetic chucks in the options list. This grinder does not work without it.  

 

 

FEATURES:

Extra Length Table & Bed Ways

The table ways are made 70% longer than the length of the working surface to prevent distortion and deflection.  The length of the bed ways are twice the table ways. This design ensures against overhang of the table working surface.

All Longitudinal and Crossfeed Ways are hand-scraped and Turcite coated for high wear resistance and super smooth table movement

2-Axis Automatic (X,Y) with manual downfeed or 3-axis with optional downfeed control

High Precision Spindles are supported by multiple anti-friction bearings, which are adjusted both Radially and Axially, and are permanently sealed with a high quality grease.

Runout of Taper Nose is less than 0.0001” T.I.R.   The spindle and Motor assembly is Dynamically Balanced to reduce vibration.

The Patented Design of the Crossfeed Motor uses a solid state relay, and requires little or no maintenance during the life of the machine.

The Mechanical directional Valve is designed to prevent any table reversal shock.

2 or 3-axes Auto

10 HP Motor

Spindle Speed 1,720 rpm

A special Hydraulic System is used, which is a free-standing unit isolated from the grinder:

The heat from the hydraulic oil does not affect grinder performance

Any vibration from the hydraulic pump is isolated from the grinder

A mechanical directional valve provides super smooth table movement with no table reversal  shock

Cartridge type oil filters are used, making the oil cylinder and directional valve virtually maintenance-free, for a full five years

Twin single-action hydraulic cylinders and piston rods make table motions rigid and stable.

Table distortion is nonexistent.

 

SPECIFICATIONS:

 

Capacity

Table Travel: 20.9”x65”

Spindle Center to Table Surface: 27.6”

 

Table

Working Surface (W x L): 19.7”x59”

Longitudinal Hydraulic Table Feed: 6.6-82 FPM

 

Feed   

Intermittent Cross Feed: 0.04-0.6

Continues Cross Feed (Ballscrew): 39 IPM

Number of graduations on dial: 200

Feed per Graduation: 0.001”

Feed per Revolution: 0.200”

 

Vertical Travel

Number of Graduations: 100

Feed per Graduation: 0.0001”

Feed per Revolution: 0.010”

Rapid Downfeed (optional): 11.8 IPM

    

Wheel Size (OD x Widdth x ID): 14” x 2” x 5”

 

Spindle Motor: 10 HP

 

Approximate Weight: 18,800 Lbs

 

Packing Crate Dimensions: 17.5’ x 7.5’ x 8.5’

 

 

 

** LARGER SIZES AVAILABLE, PLEASE CALL FOR DETAILS **

 

Total Power Consumptions

220V  15.84KVA/68 amps

440V    15.84KVA/34 amps

 

OPTIONAL ACCESSORIES:

Part #KET-50150 20” x 60” Kanetsu Electromagnetic Chuck w /transformer & rectifier and auto- demagnetizer                                                                                                      

Part # 3KVA 440T4 440 V Transformer – 3HP (for Micro Control Downfeed System)         

Part #ILP-2060 20” x 60” Walker Low Profile Electromagnetic Chuck w/control    

***All Magnetic Chucks Includes Free Installation***

Part #SH24-08   Coolant System w/ Mag. Separator, 30 G tank                                                   

Part #SH24-09   Parallel Dressing (Manual)                                                                                                 

Part #440t4 440 V Transformer – 3HP (for Micro Control Downfeed System) 3KVA                    

Part #SH-011-1  Touch screen Programmable Microprocessor Control Spindle Downfeed system with Z axes motion control

Part # SH-50 Dresser compensation package & auto parallel dresser installed, must buy       

Require SH -11-1 downfeed control together  

 *** (440V machines need transformer for programmable micro control downfeed system.)

Part #SH24-17 Spare Flange                                                                  

Spindle motor inverter in lieu of AC motor ( with this option, we can add bigger wheel to 16” and lower the speed to 1450 rpm)

*** (440V machines need transformer for programmable micro control downfeed system.)

 

Digital Readout Systems:

Part# FG-SH2060Fagor 20i D.R.O.               

Part#  FG-40i-SH2060Fagor 40i DRO                                                                                                       

Installation of DRO at factory                                                                                                    

 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.