TOSHIBA CNC TABLE TYPE BORING MILL
MODEL: BTD-110H.R13, NEW: 2013
SPECIFICATIONS
TRAVEL
X-AXIS TRAVEL (CROSS MOVEMENT OF TABLE) .......... 63"
Y-AXIS TRAVEL (VERTICAL MOVEMENT OF SPINDLE HEAD). 49.2"
Z-AXIS TRAVEL (LONGITUDINAL MOVEMENT OF TABLE) ... 44.5"
W-AXIS TRAVEL (SPINDLE EXTENSION) ................ 19.7"
DISTANCE: TABLE SURFACE TO SPINDLE CENTER MM ..... 0~49.2
DISTANCE: TABLE CENTER TO MILL SPINDLE GAUGE PLANE 16.1~60.6
TABLE WORKING SURFACE ............................ 44.1" X 49.2"
TABLE LOADING CAPACITY ........................... 8,800 LBS
TABLE SURFACE CONFIGURATION (PITCH OF T-SLOTS 160 MM, SIZE 22 MM) 7 T-SLOTS 9 T-SLOTS
MINIMUM TABLE INDEXING ANGLE (B-AXIS) DEGREES .... 0.0001
SPINDLE DIAMETER ................................. (4.3)
SPINDLE SPEED RANGE MIN- ......................... 1 5~3 000
MILLING SPINDLE NOSE DIAMETER .................... 8.9"
TYPE OF SPINDLE TAPER ............................ NO.50
FEEDRATE
RAPID TRAVERSE RATE X, Y, Z MM/MIN (IPM) ......... 12000 (472.4)
W MM/MIN (IPM) .................................. 5000 (196.9)
B DEG/MIN ........................................ 720
FEEDRATE X, Y, Z MM/MIN (IPM) .................... 1 ~ 6 000 (0.04 ~ 236.2)
AUTOMATIC TOOL CHANGER
TYPE OF TOOL SHANK 50
TYPE OF RETENTION KNOB 50T-1 (45 DEGREE)
TOOL STORAGE CAPACITY 38
MAXIMUM TOOL DIAMETER WHEN ADJACENT POTS ARE FILLED MM (IN) 125 (4.9)
WHEN ADJACENT POTS ARE EMPTY MM (IN) 240 (9.4)/T TYPE BAR Ø400 (15.7)
MAXIMUM TOOL LENGTH MM (IN) 400 (15.7)
MAXIMUM TOOL MASS KG (LBS) 25 (55)
TOOL SELECTION POT ADDRESS RANDOM SHORT-CUT
SPINDLE DRIVE MOTOR
(30 MIN./CONT. RATING) KW (HP) AC15/11 (20/15)
{AC22/18.5, AC30/22 (AC30/25, AC40/30)}
POWER SOURCE
ELECTRIC POWER SUPPLY AC200/220V +/-10%, 50/60HZ +/-2%
POWER CAPACITY KVA 47 {58, 64}
COMPRESSED AIR SUPPLY PRESSURE MPA (PSI) 0.5 ~ 0.8 (72.5 ~ 116)
FLOWRATE NL(GAL)/MIN 500 (132)
MACHINE SIZE
MACHINE HEIGHT MM (IN) 3 750(147.6)
FLOOR SPACE MM (IN) 5 050 X 5 470 (198.8 X 215.4) 5 130 X 6 560
ACTUAL FLOOR SPACE 221" X 196"
MASS OF MACHINE (INCLUDING NC EQUIPMENT) KG (LBS) 22 000 (48 400)
ACCURACY
POSITIONING ACCURACY X, Y, Z MM/MIN +/-0.005 (0.0002)/FULL LENGTH
W +/-0.010 (0.00039)/FULL LENGTH
REPEATABILITY X, Y, Z +/-0.003 (0.00012)
W +/-0.008 (0.00031)
TABLE INDEXING ACCURACY (ARBITRARY ANGLE) SEC +/-3
TABLE INDEXING REPEATABILITY (ARBITRARY ANGLE) SEC +/-1.5
MACHINE COLOR
R4-383 (MUNSELL 5Y8.4/0.5) AND N2.5
FOR THE NC SYSTEM, SERVO MOTORS AND COOLER, EACH MAKER'S STANDARD COLOR SHALL APPLY
EQUIPPED WITH
TOSNUC 999 CNC CONTROL
FULL B AXIS BUILT IN ROTARY TABLE
38 POSITION AUTOMATIC TOOL CHANGER
TABLE GUARDING
STAINLESS STEEL WAY COVERS
HIGH PRESSURE COOLANT THROUGH SPINDLE WITH INTEGRATED CHIP CONVEYOR
CHILLER
RENISHAW PROBING SYSTEM (RMP60)
