Tschudin HTG-400, REBUILT IN 2005 BY REWITECH /SWITZERLAND UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Tschudin

Model:: HTG-400, REBUILT IN 2005 BY REWITECH /SWITZERLAND

Year:: 2005

Ref #:: 160152

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

             8" X 16" TSCHUDIN "SWISS" 
  SUPER-PRECISION UNIVERSAL CYLINDRICAL GRINDER 
 
** REBUILT & UPDATED BY "REWITECH" IN SWITZERLAND, 05/2005 **
    ** ACQUISITION COST IN 2005 WAS 78,500 EUROS **  
 
   www.rewitech.ch 
                                                       
MODEL: HTG-400       S/N: 75-77     
                                                       
TABLE:  
  NOMINAL SWING ............................ 8"                                                
  DISTANCE BETWEEN CENTERS ................. 16"
  TABLE SPEED .............................. 0 TO 195" IPM
  TABLE DWELL .............................. 0 TO 6 SECONDS
  SWIVELLING RANGE ......................... +/- 11 DEGREES
 
WHEELHEAD:                                              
  WHEEL SIZE .......................... 14"DIA. X 2"W X 5"BORE
  SWIVELLING RANGE ......................... +/- 5 DEGREES
  MOTOR .................................... 4 HP
  SPINDLE SPEEDS (3) .................. 1,640, 1,940 & 2,300 RPM
 
WHEELHEAD INFEED;
  RANGE OF PLUNGE FEED DIAMETER
   REDUCTION PER MINUTE .................... 0.0005" - 0.200"
  AUTOMTIC INFEED OF THE GRINDING 
   WHEEL PER TABLE REVERSAL, MINIMUM 
  INFEED INCREMENT  DIAMETER REDUCTION ..... 0.000050"
  DIA. REDUCTION PER REV. OF 
   INFEED HANDWHEEL ........................ 0.080"
  HANDWHEEL GRADUATION READS TO ............ 0.0001"
  TRAVEL BY USING THE HANDWHEEL ............ 1.8"
  RAPID APPROACH, AUTOMATICALLY ............ 1.5"
  MOVEMENT OF WHEELHEAD SLIDE 
   BY HANDWHEEL ............................ 1.8"
  TRAVEL OF THE WHEELHEAD SLIDE INFEED,
   AUTOMATICALLY ........................... 0 TO .050" ON DIA.
  INFEED SPEED, MAXIMUM .................... 1.2"/MIN.
  SPARKOUT ................................. 2 TO 30 SECONDS 
 
WORKHEAD:                                                
  SPINDLE TAPER ............................ #5MT  
  SWIVELLING RANGE ......................... 360 DEGREES  
  INFINITELY VARIABLE SPINDLE SPEED ........ 65 TO 500 RPM  
 
TAILSTOCK:                                               
  TAPER OF CENTER BORE ..................... #3MT  
  TRAVEL OF CENTER ......................... 0.8"
  
APPROXIMATE MACHINE DIMENSIONS ......... 60"L X 48"D X 58"H  
APPROXIMATE WEIGHT ......................... 4,400 LBS  
                                                         
MACHINE FEATURES::                                           
  TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO        
   STEEL BEARING WHEELHEAD DESIGN                        
  SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS      
   FOR TRAVERSE & PLUNGE GRINDING CYCLES                 
  HYDRAULIC OPERATION FEATURING:                          
   -POWER TABLE TRAVERSE                                
   -AUTOMATIC INFEED            
   -DUAL RATE INFEED OPTION                              
   -PLUNGE INFEED                                        
   -RAPID WHEELHEAD ADVANCE AND RETRACTION                
  SPARKOUT TIMER                                          
  TSCHUDIN "STANDARD" WORKHEAD w/DUAL LIVE & DEAD SPINDLE                          
  
 
EQUIPPED WITH:
ELECTRICAL CABINET ON MACHINE, NOT SEPARATE
HYDRAULIC RESEVOIR IN BASE, ISOLATED & SEPARATE, 
  UPDATED IN 2005
COOLANT SYSTEM WITH PAPER FILTRATION
QUICK ACTING LEVER-TYPE COLLET CLOSER.  USES W25 COLLETS
THIS WORKHEAD HAS THE LARGER BORE, #5MT SPINDLE
SWING BACK DIAMOND WHEEL DRESSER
"ELASO" MODEL EB200, S/N: 100828, AUTO WHEEL BALANCING
   SYSTEM, MADE IN SWITZERLAND  
HEIDENHAIN 2X DIGITAL READOUT, INCH & METRIC
HANDWHEELS ON MACHINE ARE METRIC
RAPID COARSE HANDLE FOR RAPID MANUAL ADJUSTMENT 
  OF THE WHEELHEAD SLIDE POSITION
THIS MACHINE CAN ACCEPT A SWING DOWN I.D. 
  GRINDING ATTACHMENT
GRINDING WHEEL PRESENTLY ON THE MACHINE 
  IS 14" DIA. x 1.25"W x 5" BORE
DIAL INDICATOR FOR TABLE TAPER ADJUSTMENT
TABLE STOP SET-UP ACCESSORY
ELECTRICAL SYSYTEM UPDATED IN 2005, BEAUTIFULLY EXECUTED.
3/50/220-380 VOLT ELECTRICS
TRANSFORMER FOR 500 VOLTS TO 3/400 VOLTS, 50Hz-60Hz
 
 
                         
                                                         
* *  EXCEPTIONAL CONDITION & APPEARANCE - WOW!  * *
** REBUILT & UPDATED BY "REWITECH" IN SWITZERLAND, 05/2005 ** 
** ACQUISITION COST (ANSCHAFFUNSKOSTEN) IN 2005 WAS 78,500 EUROS ** 
* * INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE * *

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.