Tsugami BS20(B)-II CNC SWISS TYPE MULTI-AXIS LATHES

Price on Request

Make:: Tsugami

Model:: BS20(B)-II

Year:

Ref #:: 170369

Or call us for a quote at (973) 497-7500 or send us an email at automatics@machineryvalues.com

TSUGAMI BS20-II SWISS TYPE CNC LATHE
 
 
Specifications:
CNC Control:                                Fanuc LH-1 (18i-TA)
Maximum Bar Diameter:                       3/4"
Z1-Axis Travel:                             8.21"
Main Spindle
   Spindle Speed:                           200 to 8,000 RPM
   Indexing:                                C-Axis
   C-Axis Increment:                        0.001 Degree
Number of Tool Stations:                    6 OD, 4 ID, 3 ID/OD BW Tools
                                            4 Cross Driven Tools
Tooling Sizes, OD Turning:                  5/8" Square
Programmable Servo Axis Designations:
   Z1 Main Headstock In and Out:            8.21"
   T1 OD Tool Slide Up and Down:            5.90"
   X1 OD Tool Slide Right and Left:         2.00"
   X2 ID Tool Slide Up and Down:            7.90"
   Auxiliary Slide Motion:
   Z2 I.D. Tool Slide In and Out
    (Synchronous to Z1):                    7.88"
Sub-Spindle Specifications:
   Maximum Diameter:                        0.787"
   Maximum Drill Capacity - Mild Steel:     3/8"
   Maximum Tap Capacity - Mild Steel:       5/16"
   Speed Range (Serial Interface):          200 to 7,000 RPM
   Power Rating:                            3.0 HP
   Sub-Spindle Indexing:                    15 Degree increment
Part ejection:                              front or rear ejection
Horsepower of Main Spindle:                 5.0 HP
Driven Tool Drive Motor Rating:             1.5 HP
Maximum Speed Cross Tool T10-T12:           200-5,000 RPM
Maximum Speed Cross Tool T13:               120-3,000 RPM 
Offset From Guide Bushing T10 & T11:        0.472"  (.397 max. shank)
Offset From Guide Bushing T12:              0.965"  (.511 max. shank)
 
Equipped With:
  Fanuc LH-1 CNC Control
  Iemca 12' Magazine Barfeed

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.