Brown & Sharpe #1 UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Brown & Sharpe

Model:: #1

Year:: 1958

Ref #:: 140030

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

										                                                         
 10" X 20" BROWN & SHARPE "PRECISION"                 
 UNIVERSAL CYLINDRICAL GRINDER 
  
 MODEL:  #1      S/N:  521-1-316      NEW:  1958      
                                                         
 SWING OVER TABLE .................................. 10"  
 DISTANCE BETWEEN CENTERS, NOMINAL ................. 20"  
 DISTANCE BETWEEN CENTERS, MAXIMUM ............. 22-3/4" 
  
 GRINDING WHEEL SIZE ..................... 10" X 1" X 3"
 MINIMUM WHEEL WIDTH .............................. 3/8"
 WHEEL SPEEDS (3) ................ 2,500/3,000/3,600 RPM  
 SWIVEL AT THE WHEELSLIDE ........ 90 DEGREES EITHER WAY  
 WHEEL SPINDLE SWIVELS ........... 90 DEGREES EITHER WAY  
                                                         
 HEADSTOCK MOTOR ................................ 1/4 HP  
 INFINITELY VARIABLE SPINDLE SPEEDS ...... 60 TO 600 RPM  
 HEADSTOCK SPINDLE NOSE TAPER .................... A2-5"  
 HEADSTOCK SWIVELS EITHER SIDE OF ZERO ...... 90 DEGREES  
                                                         
 INFINITELY VARIABLE TABLE SPEED ........ 3" TO 150" IPM  
 TABLE PER REV. OF HANDWHEEL:                             
  SLOW ........................................... 0.1"  
  FAST ........................................... 1.5"  
 DWELL AT EACH OR ALTERNATE TABLE REV. .. 0 - 2-1/2 SEC.  
 TABLE SWIVEL, SCALES FOR ANGULAR SETTING ... 8-1/4 DEG.  
 SCALES-TAPER PER FT. ..................... 3-1/2" (25%)  
 AUTOMATIC CROSS FEED, REDUCTION IN DIAMETER OR WORK      
  AT EACH OR ALTERNATE REVERSALS ...... 0.0001" - .003"  
 HAND FEED PER REV. OF HANDWHEEL:                         
  SLOW ........................................... 0.1"  
  FAST ........................................... 0.3"  
                                                         
 TAILSTOCK SPINDLE TAPER ...................... #7 JARNO  
 TAILSTOCK SPINDLE TRAVEL ......................... 5/8"  
 APPROXIMATE WEIGHT .......................... 5,100 LBS  
                                                         
 EQUIPPED WITH:
  HYDRAULIC TABLE TRAVERSE                                
  AUTO INFEED 
  ADJUSTABLE TABLE DWELL                                  
  RIGHT OR LEFT END WHEEL MOUNTING            
  SWIVELLING AT WHEEL SPINDLE HEAD OR AT THE WHEEL         
    SLIDE PERMITS ANY COMPOUND SETTING REQUIRED IN        
    COMBINATION STRAIGHT AND TAPER GRINDING,              
    EXTERNAL OR INTERNAL 
 FINE CROSSFEED, ADJUSTABLE TO .0001" WORK DIAMETERS                                 
 DUAL DEAD/LIVE HEADSTOCK SPINDLE
 COOLANT SYSTEM
 1- 1/2 H.P./3/60/220-440 VOLT WHEELHEAD MOTOR
 SELF-CONTAINED HYDRAULIC SYSTEM
 
 * EXCELLENT CONDITION & APPEARANCE **           
 ** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
 





									

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.