Clausing CLC1250H NEW RADIAL DRILLS

Price on Request

Make:: Clausing

Model:: CLC1250H

Year:: NEW

Ref #:: 149381

Or call us for a quote at (973) 497-7500 or send us an email at boringmills@machineryvalues.com

NEW CLAUSING RADIAL DRILL
49" Arm, 25 x 20 x 16 Table, 2 3/8" Cap, 5.0 hp
MODEL: CLC1250H
 
 
Clausing Radial Drill Features and Standard Equipment:
Equipped with independent clamping unit.  Vertical movement of the arm is coordinated by an IC Timer.  With a single touch on the push button switch, you can have arm unclamped on column and move vertically, or stop clamp automatically.  Very easy to operate arm will maintain the same position after shifting. 
Gears are cooled and lubricated by an oil pump to minimize gear wear. 
Friction type disc clutch absorbs impact force caused by vertical movement of spindle and protects all transmission units inside gear-box.  With quick spindle return, the clutch will help speed-up the tapping operation. 
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drift is required). 
Special arm elevating device prevents arm from dropping abruptly after years of usage. 
Coolant System 
Tool kit and manuals 
25" x 20" x 15" Box Table 
Spindle Guard 
Standard 230 volt 3ph other voltages may require a transformer or special order.
 
Clausing Radial Drill Specifications 
  
Working Area
  Column Sleeve Dia. ( E ): 11.81"
  Column Face to Spindle Center
      Maximum (D+C): 49.21"
      Minimum (D): 14.17"
  Spindle Head Travel ©: 35.04"
  Base Surface to Spindle End
      Maximum (A): 52.95"
      Minimum (B): 17: 36"
  Arm Vertical Travel (A-B): 28.1"
  Arm Rotation (Right & Left): 180 deg.
  Baseplate Working Surface: 48" x 29.1"
  Box Table Area
      Length (L): 25.1"
      Width (K): 20.4"
      Height (H): 16.5"
  Base Dimensions
      Floor Area (R x S): 70.3" x 30.9"
      Height (Q) : 7.8"
  
Capacities
Drilling 
 In Steel: 1.97"
 In Cast Iron: 2.36"
Tapping     
 In Steel: 1.57"
 In Cast Iron: 1.97" 
  
Drilling Head
  Spindle Taper:5MT
  Spindle Stroke: 10.63"
  Quill Diameter: 3.15"
  Number of Spindle Speeds: 12
  Spindle Speeds (rpm): 56-1450
  Number of Feeds: 3
  Spindle Feed Rate (in/rev.): .0023", .0004", .008"
  Spindle Drive Motor: 5 hp (2sp)
  Elevating Motor: 1 hp
  Clamping Motor: 1 hp
  Coolant Pump Motor: 1/8 hp
  
Overall Measurements & Weight
  Maximum Machine Height (F): 104.1"
  Base & Column Height (G): 81.9"
  Shipping Dimensions (L x W x H): 81.1"x39.2"x88.2"
  Net Weight: 5,071 lbs
  Shipping Weight: 5,512 lbs 
 
 
 
OPTIONAL EQUIPMENT (CALL FOR PRICING):
CLS100 Large Tilt Table 32 x 28 x 24 
CLS101 Small Tilt Table, 20 x 20 x 23 
CLS102 Extra Large Box Table, 39 x 31 x 19 
CLS102B Extra Standard Box Table 25 x 20 x 16  
CLS-SBM5 Spindle Braking Motor 10Hp (factory installed) 
CLS-CE2 CE Electrics (factory installed) 
CLS-CSA3 CSA\UL Electrics (factory installed) (non-certified) 
CLS-200A Auto Reverse Tapping Feature 5MT (factory installed only)
 
 
WARRANTY:
 
Clausing warrantees the machine and control for a period of one year from the date of installation.  This warranty does not cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment. 
**Due to continual improvements, prices and specifications subject to change without notice** 
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.