Watch Video:

Jones & Shipman 1311E, NEW 1989, PLAIN CYLINDRICAL GRINDERS

Price on Request

Make:: Jones & Shipman

Model:: 1311E, NEW 1989,

Year:: 1989

Ref #:: 169298

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

 10" X 18" JONES & SHIPMAN "HIGH PRECISION" PLAIN CYLINDRICAL GRINDER 
                   "MADE IN ENGLAND"
  
 
MODEL: 1311-E     S/N: BO-16361     NEW: 1989 
 
MAXIMUM SWING .................................. 10"
DISTANCE BETWEEN CENTERS ....................... 18" 
ADJUTMENT OF TABLE, CW & CCW ................... 20 DEGREES 
LONGITUDINAL TABLE SPEED (HYDRAULIC) ........... 3" TO 180" IPM 
MANUAL TRAVERSE, HANDWHEEL PER REV. ............ 0.50" 
FINE HAND TRAVERSE KNOB GRAD. .................. 0.0005" 
 
  WHEELHEAD:
CROSS FEED HANDWHEEL GRAD. ..................... 0.0002" 
ONE DEPRESSION OF FINE FEED LEVER KNOB ......... 0.0001" 
AUTO INFEED @ TABLE REVERSALS .................. 0.0001" TO .0006" 
FEED @ REVERSAL OF TABLE, REDUCTION IN DIA. .... 0.0002" TO .0012" 
CONTINUOUS (PLUNGE) INFEED RATE ................ 0.0001" TO .0006" 
(PLUNGE) REDUCTION IN DIA. FROM ................ 0.004" TO .072" IPM 
MAX. RANGE OF PLUNGE FEED ...................... 0.8 REV. OF THE HANDWHEEL 
 
WHEEL SIZE ..................................... 16" DIA., x 1" TO 3"W, x 5"B
WHEEL SPEEDS (2) ............................... 1,550 & 1,990 RPM 
WHEELHEAD MOTOR ................................ 5.5 HP
 
WORKHEAD SPINDLE SPEEDS (6) .................... 40 TO 320 RPM
WORKHEAD SPINDLE TAPER ......................... #3MT 
 
APPROX. MACHINE DIMS. .......................... 66"L-R x 58"D x 69"H
APPROX. MACHINE WEIGHT ......................... 4,000 LBS.
 
  
MACHINE FEATURES:
 
HYDRAULIC OPERATION FEATURING: 
- POWER TABLE TRAVERSE 
- AUTO INFEED 
- PLUNGE INFEED 
FINE FEED MECHANISM FOR INFEED 
FINE FEED KNOB FOR TABLE TRAVERSE 
DUAL LIVE/DEAD WORKHEAD SPINDLE 
 
EQUIPPED WITH:
16" DIAMETER GRINDING WHEEL.  THE WHEEL ON THIS MACHINE IS 2"W.  
 THIS MACHINE CAN USE UP TO A 3"W WHEEL.
WORKHEAD HAS A BACKING PLATE AND A CHUCK MOUNTED ON THE BACK PLATE
COOLANT SYSTEM
5.5 H.P./3/60/575 VOLT WHEELHEAD MOTOR
MACHINE IS WIRED FROM THE FACTORY FOR 3/60/575 VOLTS
TRANSFORMER PROVIDED
 
LINK TO VIDEO: https://youtu.be/PY2y33da56Q
 
** INSPECT UNDER POWER IN OUR NEW JERSEY **
**** ORIGINAL PAINT - VERY ACCURATE MACHINE ****
**** SUPERIOR CONDITION & APPEARANCE **** 
 
 
 
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.