Watch Video:

Moore G18, 1984, MOORE ULTR-PRECISE ROTARY TABKE, JIG GRINDERS

Price on Request

Make:: Moore

Model:: G18, 1984, MOORE ULTR-PRECISE ROTARY TABKE,

Year:: 1984

Ref #:: 177847

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

    MOORE #G-18 JIG GRINDER,
     WITH SONY 2-AXIS DRO, 
  AND A MOORE "U-P" ROTARY TABLE
 
S/N: G-3319      NEW:  1984          
                                                       
TABLE SIZE .................................. 11" X 24" 
TABLE TRAVEL (LONGITUDINAL).................. 18"       
TABLE TRAVEL (CROSS) ........................ 11"       
SPINDLE HOUSING VERTICAL TRAVEL ............. 12- 5/8"  
SPINDLE VERTICAL TRAVEL ..................... 3- 5/8"   
TABLE TOP TO WHEEL COLLET ................... 2" X 18"  
SPINDLE TO COLUMN WAYS ...................... 10"       
SPINDLE TO COLUMN BELOW WAYS ................ 13-1/2"   
INFINITELY VARIABLE SPINDLE SPEEDS ...... 25 TO 225 RPM 
INFINITELY VARIABLE SPINDLE FEEDS ........ 2 TO 120 SPM 
SPINDLE FEED ADJUSTABLE FROM ......... 0.100" TO 3- 5/8"
GRINDING WHEEL SPEEDS ............. 6,000 TO 175,000 RPM
GRINDING CAPACITY (HOLE DIA.) ........ 1/64" TO 3- 1/2" 
  WITH EXTENSION PLATE ...................... 13- 1/2"
  
MAIN SPINDLE SLIDE ADJUSTMENT .............. 1-1/2 DEG. 
                       EITHER WAY, 3 DEG. INCLUDED ANGLE  
                   
RADIAL OFF-SET OF GRINDING SPINDLE:     
   (A) - FROM CENTER TO 1-1/8" OFF CENTER BY ROUGH ADJ.   
   (B) - WHILE RUNNING .0001" ADJ. FOR DISTANCE OF .100"  
         ANYWHERE IN THE 1-1/8" RANGE 
         
APPROXIMATE WEIGHT ........................ 4,000 LBS  
APPROX. FLOOR SPACE REQUIRED ...... 58"LR x 59"FB x 91"H
MINIMUM HEIGHT WITH HEAD IN DOWN POSITION ... 86"  
                                                         
MACHINE FEATURES:                                           
 ELECTRONIC SERVO DRIVE PROVIDES INFINITELY           
   VARIABLE SPINDLE SPEEDS (25 TO 225 RPM)            
 HARDENED, GROUND AND LAPPED STEEL WAYS (NO GIBS)     
 HARDENED, GROUND & LAPPED NITRALLOY LEAD SCREWS      
 LEADSCREWS & NUTS ARE FULLY IMMERSED & OPERATE
 IN A BATH OF OIL.  
 1/5 H.P. D.C. MOTOR (MAIN SPINDLE).
   
EQUIPPED WITH:
MOORE 40,000 RPM JIG GRINDING HEAD ON THE MACHINE
SECOND MOORE JIG GRINDING HEAD, AS SHOWN ON THE TABLE
MOORE "ULTRA-PRECISE" ROTARY TABLE, S/N: UP-2875
"SONY" MODEL LH-31A HIGH ACCURACY 2-AXIS DIGITAL READOUT, 
 WITH 0.00001" DISPLAY RESOLUTION.  
MACHINE IS WIRED FOR 220 VOLTS/1 PH/60 HZ
 
 LINK TO VIDEO: https://youtu.be/MSkVPy8IS6M?si=wW0To8QflvIKW7uc
 
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **
** LATEST MOORE JIG GRINDER AVAILABLE **
** - EXCELLENT CONDITION - ORIGINAL PAINT - **  

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.