Watch Video:

Haas ST-15 w/Subspindle & Barfeed 106 CUT HOURS CNC TURNING CENTERS - CNC LATHES

Price on Request

Make:: Haas

Model:: ST-15 w/Subspindle & Barfeed 106 CUT HOURS

Year:: 2020

Ref #:: 166508

Or call us for a quote at (973) 497-7500 or send us an email at cncmachines@machineryvalues.com

HAAS ST-15 CNC TURNING CENTER w/SUBSPINDLE & HAAS SERVO BARFEED
NEW: 9/2020
 
VIDEO LINK: https://youtu.be/RJ6wViq-ExY?si=YrCdq9NhE03nHP1-
CAPACITIES  
Chuck Size 8.3 in 
Max Part Swing 16.5 in 
Max Cutting Diameter (with BOT turret) 12.00 in 
Max Cutting Length (varies with workholding) 16.0 in 
Bar Capacity 2.50 in 
TRAVELS 
X Axis 7.9 in 
Z Axis 16.0 in 
FEEDRATES 
Rapids on X 1200 ipm 
Rapids on Z 1200 ipm 
AXIS MOTORS 
Max Thrust X 3300 lbf 
Max Thrust Z 3300 lbf 
SPINDLE 
Spindle Nose A2-6 
Max Rating 20.0 hp 14.9 kW
Max Speed 4000 rpm 
Max Torque 150.0 ft-lbf @ 500 rpm 
Spindle Bore ø 3.50 in 
SUB-SPINDLE  
Chuck Size 5.3 in 
Spindle Nose A2-5 
Max Speed 6000 rpm 
Max Sync Speed w/Main Spindle 4800 rpm 
Chuck Throat Ø 1.30 in x 1.37 in DEEP 
Drawbar Bore (non-through) Ø 1.00 in x 4.50 in DEEP 
Spindle Bore (without chuck and drawbar installed) 1.50 in 
Rapids (B-axis) 400 ipm 10 m/min
 
TURRET 
Number of Tools 12-Station HYBRID BOT/VDI 
OD vs ID Tools Any Combination (will vary with turret)
Boring Bar Rear Clearance (from back of turret ) 0.75 in 
GENERAL 
Coolant Capacity 30 gal 114 L
 
ELECTRICAL SPECIFICATION 
Spindle Speed 4000 rpm 
Drive System Direct Speed, Belt Drive 
Spindle Power 20.0 hp 14.9 kW
Input AC Voltage (3 Phase) - Low 220 VAC 
Full Load Amps (3 Phase) - Low 40 A 
Weight 7900 lb 
 
EQUIPPED WITH:
 - HAAS CNC CONTROL
 - AUTOMATIC TOOL PRESETTER
 - 8" SAMCHULLY 3-JAW HYDRAULIC CHUCK ON MAINSPINDLE
 - 5" 3-JAW HYDRAULIC CHUCK ON SUBSPINDLE
 - PARTS CATCHER
 - 6,000 RPM SUBSPINDLE
 - HYBRID BOT/VDI TURRET
 - 300 PSI HIGH PRESSURE COOLANT
 - AUXILIARY COOLANT FILTER SYSTEM
 - AUTO DOOR
 - WiFi CAMERA
 - BELT TYPE CHIP CONVEYOR
 - HAAS BARFEEDER
 - ALL AVAILABLE TOOLHOLDERS
 
MACHINE IS IN EXCELLENT CONDITION, 106 FEED CUTTING HOURS
 
 ROTA-RACK PARTS ACCUMULATOR AVAILABLE FOR ADDITIONAL COST  

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.