Acer ATL-1440E CNC LATHES, FLAT BED (ENGINE LATHE STYLE)

$37,950

Make:
Acer
Model:
ATL-1440E
Year:
Ref #:
159793

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com


NEW ACER ATL 1440E FLAT BED CNC TEACH LATHE
 
Features:
  • 1-9/16" (40mm) Spindle Bore with D-1 Camlock Spindle Nose
  • 5HP Spindle Motor (continuous)/7.5HP (30min) for 3Phase 60 HZ Wiring
  • Hardened and Ground Meehanite Casting Bedway, Ground Gears, and Spindle
  • 3 Speed Range: 60 ~ 2,700 RPM
  • "FAGOR" 8055 i/A-TC CNC Control
  • Constant Surface Speed
  • Manual - Teach - CNC Modes
  • Dual MPG Handwheel
  • C3 Ball Screw on X-Axis, C5 Ball Screw on Z-Axis & Laser Calibration on all Axes
 
Control Capabilities:
  • Use as a D.R.O. in Manual Mode
  • Electric Handwheel for Semi-Auto Mode
  • Program in Teach Mode
  • Program w/Canned Cycles
  • Powerful CNC Full Auto Mode
  • No Programming Experience Required
  • Conversational or G-Code Programming
  • Minimum Set-Up Time
 
Specifications:
Height of centers: 7"
Swing over bed: 14"
Swing over cross slide: 8-3/4"
Swing over saddle wings: 14.17"
Distance between centers: 39.37"
Spindle Nose: D1-4
Spindle taper: MT#5
Spindle Dia. At Front Bearing: 2.77"
Spindle through hole: 1-9/16"
Taper in reduction sleeve: MT#3
Number of spindle bearing: 2
Number of speed range: 2
Spindle speed range RPM: 60~650/300~2700
Cross slide travel: 7.87"
Compound rest travel: 3.94"
Tool section Max.: 3/4" x 3/4"
Bed length: 54"
Width of bed: 9"
Height of bed: 10.63"
Slideway surface hardness: HRC 48
Quill outer diameter: 1-9/16"
Quill travel: 4"
Taper center: MT#3
Maximum rapid feed Z (IPM): 400 IPM
Maximum rapid feed X (IPM): 400 IPM
Spindle motor brake: w/Servo Motor
Headstock lubrication: Splash Lube
Coolant tank capacity: 5.78 gal.
Coolant pump motor: 1/8 HP
Spindle motor: 5 HP (cont) / 7.5 HP (30 min)
Power requirements, machine: 230V/11 HP/ 38A
Floor dimensions: 77.96"x46.46"x74.81"
Packing dimensions: 82.68"49.22"x86.62"
Weight net: 2200 lbs.
Weight gross: 2420 lbs.
 
Standard Accessories:
  • Halogen work light
  • Tool box w/tools
  • Fully enclosed splash guard
  • Coolant system
  • Automatic lubrication system
  • Manual tailstock
 
Optional Accessories:
  • 6" 3-jaw chuck (D1-4) w/direct mount
  • 8" 3-jaw independent chuck (D1-4) w/direct mount
  • 8" 4-jaw independent chuck (D1-4) w/backplate
  • Steady Rest w/Rollers (0.78"~2.15")
  • Follow Rest (0.78"~1.97")
  • Face Plate (10")
  • "Aloris" Tool Post & 4-Holder set (#2 - BS)
  • "Aloris" Tool Post & 6-Holder set (#2 - Set)
  • Four Way Tool Post
  • H4 Electric Tool Post (C6140)
  • 5C Collet Closer (lever-type)
  • Upgrade to 440V / 3-Phase Inverter Drive
  • Program Training
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.

Similar Machines

We're here to help

Looking for a specific machine?

Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice: (973) 497-7500
Fax: (973) 497-7501
Email
sales@machineryvalues.com
Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice:
(973) 497-7500
Fax:
(973) 497-7501
image description

Buy on ebay

Shop now

Get Financing

Apply now