NEW KINGSTON HD PRECISION LATHE
MODEL: HD-22 SERIES
SPECIFICATIONS:
SWING OVER BED: ..................... 22"
SWING OVER CROSS SLIDE: ............. 13"
SWING IN GAP: ....................... 31.3"
GAP WIDTH IN FRONT OF THE FACE PLATE: 10.6"
DISTANCE BETWEEN CENTERS: ........... 35", 60", 90", 120" 160"
WIDTH OF BED: ....................... 15.7"
HEIGHT OF CENTER FROM LEG BOTTOM: ... 42"
SPINDLE BORE: ....................... 4.09"
TAPER OF SPINDLE BORE & CENTER: ..... MT#7 X #5
TYPE OF SPINDLE NOSE: ............... D1-8
NUMBER OF SPINDLE SPEEDS: ........... 12
SPINDLE SPEED: ...................... 13~1,200 RPM
NUMBER OF FEED CHANGES: ............. 16
FEEDS PER REVOLUTION - LONGITUDINAL:. 0.0012"~0.039"
FEEDS PER REVOLUTION - CROSS: ....... 0.0004"~0.0117
LEADSCREW DIAMETER & THREADS/INCH: .. 1.77", 4TPI
RANGE OF INCH THREADS: .............. 2-72 TPI(44)
RANGE OF METRIC THREADS: ............ 0.2-14(39)
MAXIMUM TRAVEL OF COMPOUND: ......... 9.5"
MAXIMUM TRAVEL OF CROSS SLIDE: ...... 15.8"
TAILSTOCK QUILL TRAVEL: ............. 9.8"
TAILSTOCK QUILL DIAMETER: ........... 2.9"
TAPER IN TAILSTOCK QUILL: ........... M.T. #5
MAIN DRIVE MOTOR: ................... 10 HP
COOLANT PUMP MOTOR: ................. 1/8 HP
STANDARD EQUIPMENT & ACCESSORIES:
• MAIN MOTOR: 10 HP (22” SWING) / 15 HP (26” SWING), 230V / 460V, 3 PHASE, 60 CYCLE, SWITCH & WIRING
• 4.09" SPINDLE BORE
• SPINDLE NOSE: D1-8 / D1-11 (22” / 26” SWING)
• 12 SPINDLE SPEEDS (13 – 1,200 RPM)
• HARDENED & GROUND BED & CROSS SLIDE WAYS
• CROSS SLIDE SCREW: 8 / 5 TPI (22” / 26” SWING)
• LEAD SCREW: 4 TPI / 2 TPI (22" / 26" SWING)
• THREAD CHASING DIAL
• AUTOMATIC LONGITUDINAL FEED STOP BAR
• 4-WAY TOOL POST FITTED TO T-SLOTTED COMPOUND
• LED WORK LIGHT• 10” STEADY REST WITH ROLLER JAWS
• Z-AXIS RAPID TRAVERSE (EXCEPT 35” & 60” C.C.)
• CHUCK GUARD
• HEADSTOCK SPINDLE CENTER ADAPTOR: MT#7 TO #5
• GROUND STEEL CENTER MT#5 FOR HEADSTOCK
• 12" BACK PLATE
• TWO-SPEED DRIVE TAILSTOCK SPINDLE (MT#5)
• COOLANT SYSTEM WITH PUMP AND PIPING
• FULL LENGTH SPLASH GUARD
• PULL DRAWER CHIP (OIL) PAN
• TOOL BOX W/ NECESSARY WRENCHES & SPANNERS
• INSTRUCTION MANUAL & PARTS LIST
• EMERGENCY STOP BUTTON
OPTIONAL ACCESSORIES:
ADDITIONAL 10" STEADY REST WITH ROLLER JAWS (MIN. CAPACITY 1.6")
15" STEADY REST WITH ROLLER JAWS (MIN. CAPACITY 7.5")
7" FOLLOW REST
TELESCOPIC TAPER TURNING ATTACHMENT
Z-AXIS RAPID TRAVERSE ON 35" OR 60" BED
MICRO CARRIAGE STOP
TURRET CARRIAGE STOP
TAILSTOCK COMPLETE CRANK ASSEMBLY
CONVERT CROSS FEED SCREW (HD-22 TO 5 TPI)
ALORIS CA TOOL POST ONLY
ALORIS CA TOOL POST PLUS 6 TOOL HOLDERS (SET #4)
ALORIS DA TOOL POST ONLY
ALORIS DA TOOL POST PLUS 6 TOOL HOLDERS 9SET #5)
NEWALL DP-700 2-AXIS DIGITAL READOUT
CHUCKS
SAFETY ACCESSORIES:
ADD LIMIT SWITCH TO CHUCK GUARD
CLEAR LEXAN CHUCK GUARD (INSTALLED)
LEADSCEW GUARD (60"/90" LENGTHS ONLY)
TRAVELGUARD TOOL POST GUARD (KINGSTON INSTALLATION)
HEAVY DUTY TOOL POST GUARD (FACTORY INSTALLATION ONLY)
NRTL/UL READY (UL/NFPA STANDARDS, NO CERTIFICATION
NRTL/UL CERTIFICATION
SIZES AVAILABLE
HD-2235
HD-2260
HD-2290
HD-22120
HD-22160
