K.O. Lee B6062 DAKOTA SERIES, NEW 1982, TOOL & CUTTER GRINDERS

Price on Request

Make:: K.O. Lee

Model:: B6062 DAKOTA SERIES, NEW 1982,

Year:: 1982

Ref #:: 151317

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

   K.O. LEE "DAKOTA" SERIES UNIVERSAL TOOL & CUTTER GRINDER 
 WITH "TILTING" WHEELHEAD +/- 22 DEGREES OF CENTER
 
** MACHINE COMES WITH A K.O. LEE MOTORIZED WORKHEAD, 
    WITH A "MINARIK" ELECTRONIC VARIABLE SPEED CONTROL **
 
MODEL: B6062       S/N: 21550-NE     NEW: 1982 
 
  SWING OVER TABLE .............................. 12-1/4" 
DISTANCE BETWEEN TAILSTOCKS ..................... 32" 
TABLE WORKING SURFACE ........................... 5-1/4" X 37-1/4" 
SUB TABLE ....................................... 8" X 48" 
LONGITUDINAL TABLE TRAVERSE ..................... 20" 
TABLE FEED PER REV. OF HANDWHEEL: 
FAST ............................................ 2-13/16" 
SLOW ............................................ 9/16" 
CROSS FEED ...................................... 8" 
FEED PER REV. OF HANDWHEEL (.001" GRAD.) ........ 0.100" 
VERTICAL MOVEMENT OF COLUMN ..................... 10-1/2" 
FEED PER REV. OF HANDWHEEL (.001" GRAD.)......... 0.050" 
COLUMN DIAMETER ................................. 6" 
 
MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL 
SHAFT TO TABLE .................................. 5-3/8" / 15-1/4" 
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
  OF STRAIGHT WHEEL; DOVETAIL SLIDE NOT EXTENDED,
  SPINDLE 90 DEG. TO TABLE ...................... 6-3/8" 
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
  OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED,
  SPINDLE 90 DEGREES TO TABLE ................... 11-1/2" 
TABLE SWIVELS (CALIBRATION: 3" PER FT.,
  15 DEG. EITHER SIDE OF CENTER) ................ 225 DEGREES 
WHEEL HEAD SWIVEL ............................... 360 DEGREES
 
MAXIMUM I.D. DEPTH, HOLE SIZE 9/32" TO 2" ....... 3-1/2" 
MAXIMUM CROSS FEED SURFACE GRINDING W/8" WHEEL... 5" 
SPINDLE SPEED RANGE 
(HEAVY DUTY WHEELHEAD) .......................... 2840 TO 5330 RPM 
APPROXIMATE MACHINE WEIGHT ...................... 1,300 LBS 
 
  EQUIPPED WITH:
K.O. LEE MOTORIZED INFINITELY VARIABLE SPEED WORKHEAD WITH 5C COLLET DRAW BAR,
 WITH HIGH SWING FOR THE DAKOTA SERIES MACHINE (12- ¼” SWING).
WORKHEAD HAS A "MINARIK" ELECTRONIC VARIABLE SPEED CONTROL .... CONTROL THE WORKHEAD
 SPINDLE SPEED BY TURNING A DIAL.
 
"DAKOTA" HEAVY DUTY #B6055HD UNIVERSAL GRINDING WHEELHEAD FEATURES: 
- SWIVELLING & TILTING (22 DEG. EITHER SIDE OF VERTICAL) 
- 1 HP MOTOR WIRED FOR 3/60/220-440 VOLT OPERATION 
- 3-1/2" TO 8" DIAMETER WHEELS
 
MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS
 
  ** EXCELLENT CONDITION & APPEARANCE ** 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **      

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.